Table of Contents
Advertisement
When you press [OK] key in the "Delete All
Channel" item, it will display a dialogue box asking
you to confirm to delete all channel. If you select
"YES", all channels will be deleted
.
12.2.3 Save default value
When you press [OK] key in the "Save default
value" item,there will show a message to ask
you"Do you want to set current database as
default data?".If you select "YES",it will set the
current data as default data.
12.3 Software Upgrade
Upgrade by RS232:
We offer this function for user to connect
1
receiver (Master) to the other receiver (Slave)
via serial interface.Connect master receiver to
slave receiver via serial interface. Enter
"Software Upgrade" menu in master receiver
and press[Volume Up/Volume Down]keys to
switch upgrade mode： All SW+bootloader /All
SW+Channel list/Software(no channel
list)/Channel list.
Moving highlight to "Start" on master reeciver
2
and press[OK]key to start upgrade.
Turn on slave receiver and it needn't operate
3
any setting.
Press [MENU]key to draw back.
4
Upgrade By Satellite:
This function can upgrade the software through signal
lines from the satellite
24
- Quick Links:
- Remote Control
- Connecting Your System
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Mini Combo HD and is the answer not in the manual?
Questions and answers
keeps turning off every 2to3hrs everyday
The Amiko Mini Combo HD may be turning off every 2 to 3 hours due to the "Standby After Finish" setting. If this setting is enabled, the system will automatically enter standby mode after a recording stops. Additionally, a timer setting could be configured to turn off the device at specific intervals. Checking and adjusting these settings in the menu can help resolve the issue.
This answer is automatically generated