Callback Requests - Nokia 6260 User Manual

r1024_en.book Page 28 Thursday, July 8, 2004 12:40 PM
C a l l f u n c t i o n s
3. To request a speech turn, press
Wait until your phone receives a speech turn signal. When the phone
displays Talk, you have 30 seconds to talk on your speech turn.
Press and hold
phone in front of you so that you can see the display. When you have
finished, release the key. Talking is allowed on a first-come, first-
served basis. When someone stops talking, the first person to press
can talk next.
4. To switch between several active sessions, select Swap.
5. To end the active session, select Deactiv..
If you have other active sessions, the phone moves to the next
session.
If there are no other sessions, the phone displays a note stating that
there are no active sessions.
6. To exit the push to talk application, select Options→Exit.
Receiving a push to talk call
A short tone notifies you of an incoming group or a one-to-one call.
Press Accept to receive the call or
When receiving a group call, the group name and the nickname of the
caller are displayed. When receiving a one-to-one call from a person
whose information you have saved in Contacts, the saved name is
displayed if identified; otherwise, only the nickname of the caller is
displayed.

Callback requests

Go to Options→PTT contacts
Sending a callback request
If you make a one-to-one call and do not get a response, you can send a
request for the person to call you back. You can send a callback request
in different ways:
• To send a callback request from the contacts list in the
select Options→PTT
Options→Send callback
28
. The phone sends your request.
the entire time you are talking, and hold the
Silence to reject it.
or PTT log.
contacts. Scroll to a contact and press
req..
PTT menu,