Page 1
1010 UHF Wireless System™ OWNER’S MANUAL — p. 1 MANUAL DE INSTRUCCIONES — p. 6 MODE D’EMPLOI — p. 11 MANUAL DO PROPRIETÁRIO — p. 16 MANUALE UTENTE — p. 21 BEDIENUNGSHANDBUCH — S. 26...
• Only use the equipment for the applications described in this more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL- manual. Fender cannot accept any liability for damages resulting FCC) or visit the FCC’s website at www.fcc.gov/cgb/wirelessmicro- from improper handling or misuse.
Page 3
Introduction 6 CHANNEL carrier frequencies within the receiver’s carrier frequency range..for purchasing a Fender product. This manual contains important instructions for setting up and operating your equipment. Please take Rear Panel a few minutes to read the instructions below carefully before operat- ing the equipment.
1010 2. SETTING UP Pocket Transmitter You can use the pocket transmitter with an electric guitar, electric bass or keytar. The PT1010 operates within a switching bandwidth of Positioning the receiver up to 30 MHz in the 530.025 to 931.850 MHz UHF carrier frequency range and offers up to 8 selectable carrier frequencies.
AC voltage may cause damage to the unit. 2) Plug the feeder cable of the included power supply into the DC IN Fender cannot guarantee that the pocket transmitter socket on the receiver. will work perfectly with products from other manufac- 3) Plug the AC adapter into a power outlet.
1010 Troubleshooting PROBLEM POSSIBLE CAUSE REMEDY No sound 1. AC adapter is not connected to receiver and/or power outlet. 1. Connect AC adapter to receiver and/or power outlet. 2. Receiver is OFF. 2. Push ON/OFF switch to switch receiver ON. 3.
Need help?
Do you have a question about the FWG 1010 and is the answer not in the manual?
Questions and answers