Related Manuals for ORVIBO S20
Summary of Contents for ORVIBO S20
- Page 1 S20 WiFi Socket Model: S20 WWW.ORVIBO.COM Picture only for your reference. take real product as example. ...
- Page 2 INTRODUCTION Feature Support WiFi network. Support Smart configure net technology, easy to access settings. Home appliances status timely feedback to APP. Support Max 10 timing task. App support Max 150 WiFi sockets Support Max 20 devices to control WiFi socket Easy installation, easy handling and can be activated immediately and stably. Date Power supply AC 100‐240V Max current 10A Max power 2000W（resistive load） Efficiency ≥90% Material V0 ABS Wireless standard Wi‐Fi 2.4GHz b/g/n Wireless frequency 2.412‐2.462GHz Security type WEP/TKIP/AES Security mechanism WEP/WPA‐PSK/WPA2‐PSK ≦ Wireless consumption 0.3W Working temperature ‐20~45℃ ...
- Page 3 Working humidity ≤80% Jack Switch/backlight Switch function 1. Reset to defaults: Connecting socket to power, press switch constantly until it is in fast blinking with red light(5times/s). 2.AP configure: Connecting socket to power, press switch constantly until it is fast blinking with blue light(5times/s). 3.Switch on/off the power of socket Backlight indicator backlight status Fast blinking in red light. Smart link configuration (5times/s) Slowly blinking in red Internet connection fail and socket is power off ...
- Page 4 is power off Fast blinking in blue light. AP configuration (5times/s) Slowly blinking in blue Internet connection fail and socket is power on Constantly on in blue Internet connection successful and socket is power on Caution 1. Keep it in dry and it is not allowed to be used in bathroom. 2. Rated power is 2000W, some of home appliance when it is starting the peak power could be over 2000W, so please use safely. USER GUIDE Download App ...
- Page 5 Option 2: you can go to Apple store or Android market searching WiWo2 and download it for free.(see picture2) （picture2） Smart Link configuration Connect socket to the power, LED backlight fast blinking with red(5times/s), socket in configuring mode. Configuration Go to APP configuration page Enter wifi password which the socket is connected with, setup new socket. ...
- Page 6 After configuration is successful you will see device list and you can try to control the socket by turn on/off button in the APP. Press device go to setting. Device setting You can rename socket, timing, countdown, lock/unlock ...
- Page 7 scene Go to scene, you can name a scene and select a icon, setting severals sockets’ status. FAQ Q1: How could I know whether the smart socket is configured successfully? A1: If it is configured successfully the backlight will be on constantly. Q2: What can I do if the configure is failure? A2: There are several reasons as below 1) If your smart phone or pad is Android system please make sure the version of system update to 2.3 or above. 2) During configuring, APP will automaticly notice the name of router, ...
- Page 8 if the APP can’t find your router please check your smart phone and WiFi connection. 3) Please check if you give the right password with WiFi. 4) Please check if your router can support wireless IEEE802.11b/g/n standard. 5) Please make sure you enter the right user name of the internet. 6) Please make sure your router security mechanism is WEP,WPA‐PSK or WPA2‐PSK, we recommend WPA/WPA2. 7) Please make sure you have available IP for the router, if not you can disconnect other device and try again. 8) None of the above, according to the manual please configure again. Q3: Why does the smart socket backlight is slowly blinking after configure? A3: Please check as below: ...
- Page 9 A5: AP configure is an auxiliary way to connect smart socket to the router. Q6: How does the smart socket connect to the router if change a new one? A6: Please configure smart socket and wireless router again. Q7: The smart socket can be controlled only at home? A7: No, you can control smart socket anywhere there is network available for your smart phone. Q8: Why does the smart socket show offline sometimes? A8: Please check if WiFi is disconnected or not available, and try to restart router. ...
- Page 10 control your smart socket anymore. Q15: How many timing tasks can I set at most? A15: Every smart socket Max supports 20 timing tasks. Q16: Why does it not work when I set a timing task? A16: Smart socket will read current time from network, if your router doesn’t connect to network smart socket will not read the right time, then the timing task is failure. Besides please keep smart socket always power on after create timing task, once power is off the timing task is failure. ...
- Page 11 FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference ...
Need help?
Do you have a question about the S20 and is the answer not in the manual?
Questions and answers
ORBIVO S20 smart socket use in UK. There is no working app available. Can you help
To use the ORVIBO S20 smart socket in the UK without a working app, you can try the following methods:
1. ESP8266 as an Access Point:
- Use an ESP8266 module to act as the access point for the S-20, bypassing the need for a router.
- Configure the ESP8266 to communicate directly with the socket for control.
2. Home Assistant Integration:
- Configure the S20 in Home Assistant by setting its IP and MAC address manually if auto-discovery fails.
- Ensure the socket was initially set up using the HomeMate app before integrating with Home Assistant.
3. Alternative Control Methods:
- If the socket supports local network communication, try using a third-party smart home system that can send commands to it.
- Use a packet-sniffing tool to capture commands from the official app and replicate them using a custom script.
If none of these methods work, a factory reset and reconfiguration using the app might be necessary before attempting alternative control methods.
This answer is automatically generated