Planet PS-1010MG User Manual page 85

3. A user always connects the MFP Server.
Check the "Idle Timeout" setting of the MFP Server from the right side of "MFP Server
Control Manager". If the status is "Never Timeout", please contact with your
administrator to change the setting.
Contact with the current user and ask the user to disconnect the device.
If the user forgets to disconnect the device, you can inform the administrator to release
the device.
4. I can't use the MFP to scan, print or read the card reader even I have followed the
installation of MFP as the manual.
Check if the MFP you are using is in the "Compatibility List" in Appendix.
Attached the MFP to PC directly and try if the MFP is able to use.
80