Advertisement
Advertisement
Table of Contents
Related Manuals for Garmin AMPS Rugged Mount
Summary of Contents for Garmin AMPS Rugged Mount
- Page 1 AMPS Rugged Mount MONTANA 600 Series ™ Instructions...
-
Page 2: Limited Warranty
Incorrectly wiring the power/audio cable with bare wire leads can result in damage to the vehicle or the battery. Garmin strongly recommends having an experienced installer with the proper knowledge of electrical systems install the mount. in the Box •... - Page 3 Connecting Power to the Mount notice If any wire is left unconnected, insulate the wire and safely secure it on your vehicle. 1. Select a location to mount the Montana on your vehicle, based on available power sources, safe cable routing, and that the driver view is not obstructed. 2.
- Page 4 attaching an aMPS Base Plate to the Mount The AMPS mount is not included with the rugged mount. 1. Thread the screws through the washers , mount , and AMPS mount base ➊ ➋ ➌ plate (not included). ➍ ➎ ➌...
- Page 5 1. Place the weather cap in the storage area on the mount. ➊ ➌ ➊ ➋ 2. Fit the bottom of your device into the cradle ➋ 3. Tilt the device back until it snaps into place. 4. Using the security screw tool, tighten the security screw on the top of the ➌...
Need help?
Do you have a question about the AMPS Rugged Mount and is the answer not in the manual?
Questions and answers