Warning Lights And Messages - Dodge Journey 2018 Owner's Manual

Hide thumbs Also See for Journey 2018:
Table of Contents

Advertisement

• The vehicle was parked for an extended period of time
(weeks, months).
• The battery was recently replaced and was not charged
completely.
• The battery was discharged by an electrical load left on
when the vehicle was parked.
• The battery was used for an extended period with the
engine not running to supply radio, lights, chargers,
+12V portable appliances like vacuum cleaners, game
consoles and similar devices.
What to do when an electrical load reduction action
message is present ("Battery Saver On" or "Battery Saver
Mode")
During a trip:
• Reduce power to unnecessary loads if possible:
– Turn off redundant lights (interior or exterior)
– Check what may be plugged in to power outlets +12V,
115V AC, USB ports
– Check HVAC settings (blower, temperature)
– Check the audio settings (volume)
GETTING TO KNOW YOUR INSTRUMENT PANEL 145
After a trip:
• Check if any aftermarket equipment was installed (ad-
ditional lights, upfitter electrical accessories, audio sys-
tems, alarms) and review specifications if any (load and
Ignition Off Draw currents).
• Evaluate the latest driving cycles (distance, driving time
and parking time).
• The vehicle should have service performed if the mes-
sage is still present during consecutive trips and the
evaluation of the vehicle and driving pattern did not
help to identify the cause.

WARNING LIGHTS AND MESSAGES

The warning/indicator lights will illuminate in the instru-
ment panel together with a dedicated message and/or
acoustic signal when applicable. These indications are
indicative and precautionary and as such must not be
considered as exhaustive and/or alternative to the infor-
mation contained in the Owner's Manual, which you are
advised to read carefully in all cases. Always refer to the
information in this chapter in the event of a failure indica-
tion. All active telltales will display first if applicable. The
system check menu may appear different based upon
equipment options and current vehicle status. Some tell-
tales are optional and may not appear.
4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Journey 2018 and is the answer not in the manual?

Questions and answers

Grover Joseph
March 28, 2025

how do you lock the tailgate

1 comments:
Mr. Anderson
March 28, 2025

To lock the tailgate on a 2018 Dodge Journey, use one of the following methods:

1. Press the lock button on the Remote Keyless Entry key fob.
2. Press the Keyless Enter-N-Go (Passive Entry) lock button located under the left side of the accent bar below the liftgate glass.
3. Use the power door lock switch on either front door trim panel.

The tailgate cannot be locked using the manual door lock plungers or the driver’s door lock cylinder.

This answer is automatically generated

Tim
April 22, 2025

Where is the TCM located 2018 Dodge Journey V6 GT front wheel drive not under steering column

Table of Contents

Save PDF