Reversing The Door Swing; Changing The Reversible Door - GVA GVAPP240 Instruction Manual

Reversing the Door Swing

This upright fridge can be opened from either the left side or right side to suit your
individual installation requirements. If you want to open the door from the other side, follow
the instructions below and opposite to reverse the door swing (the numbers in brackets
refer to the parts in the illustrations).

CHANGING THE REVERSIBLE DOOR

WARNING!
Ensure the upright fridge is disconnected from the power supply when
CAUTION: To avoid personal injury to yourself and/or property, we
reversing door swing.
NOTE: Keep all parts you remove for re-installation of the door on the other side.
recommend someone assist you during the door reversal process.
1. Remove the top hinge cover by unscrewing the screws that fix it.
2. Pull the door upwards to remove it from lower hinge.
1. Remove the door hinge cover (1), then remove door hinge pin (3) by unscrewing the
3. Tilt the cabinet backwards to remove lower hinge and two adjustable feet.
screws(2) that fixed it.
2. Carefully lift the door upward to remove it from the bottom hinge (9).
Move the lower hinge to the opposite side and secure it, along with the 2 adjustable feet.
4.
3. Tilt the cabinet backwards to remove bottom hinge (9) and two adjustable legs (11)
5. Position and slot the door onto the lower hinge.
from the fridge.
6. Remove the plug cover (covering the hinge hole) on the top of the door frame, then secure
4. Move the bottom hinge (9) to the opposite side and secure it with screws (10). Then
the top door hinge cover on the same side of the door as the lower hinge.
place adjustable legs back on. (11)
The reversal process is now complete.
1. Door hinge cover
2. Screw
3. Door hinge pin
4. Plug
5. Plug cover
6. Plug
7. Bottom hinge pin sleeve
8. Screw
9. Bottom hinge
10. Screw
11. Adjustable Legs
13