Ii.8 Printing - Brookfield DV2T Operating Instructions Manual

Measurement data should not be collected when the %Torque reading is out of range. The out of
range condition can be resolved by either changing the speed (reduce speed when reading is out of
range: high) or changing the spindle (increase the spindle size when the reading is out of range: low).
TIP: When comparing data, the test method is critical. Be sure that you know the proper spindle
and speed required for the test method. If readings are out of range, this condition should
be reported as the test result.

II.8 Printing

The DV2T Viscometer can communicate to a Dymo Label Writer 450 Turbo label printer. This
printer can be purchased from Brookfield (Part No. GV-1046). The communication to the printer is
by USB (cable provided with the printer). When the printer is connected to the DV2T, the printer
icon will be visible in the status bar.
The DV2T Viscometer can configure the print out for several formats of paper/labels. These
various paper/label stocks are available from Brookfield.
1. GV-1049-10 SHIPPING LABEL 2.31 X 4IN. 300 P/ROLL (PKG of 10)
2. GV-1048-10 ADDRESS LABEL 1.13 X 3.5IN. 350 P/ROLL (PKG of 10)
3. GV-1047-10 CONTINUOUS PAPER 2.25IN. WD. X 300FT. LG (PKG of 10)
Brookfield Engineering Labs., Inc.
Figure II-8
Page 21 Manual No. M13-167