CONTENT Page Introduction Getting Started Operating the Camera User Menu Maintenance Specifications FLIR-DIRECT 4204190 - Rev 1 U S E R M A N U A L # info@FLIR-Direct.ca 1.800.561.8187...
SECTION 1. INTRODUCTION 1.1 SCOPE DETECTION I see something. This manual covers the FLIR SCOUT TK Series and all applicable components. It is recommended that this manual be read and understood to optimize camera operation. 1.2 INTRODUCTION FLIR’s SCOUT TK Series thermal handheld camera gives the user the ability to see clearly in total darkness, providing a wealth of information during any nighttime activity.
1. Lift the cover from the USB port. In addition to the camera the following items are included in the camera package: 2. Plug the cable provided with the FLIR SCOUT TK into the camera’s USB port. • FCC Declaration of Conformity 3.
Quickly decreases the display brightness Camera OFF Turns Power ON display brightness by one increment Camera ON Access User Menu Turns Power OFF FLIR-DIRECT 4204190 - Rev 1 U S E R M A N U A L # info@FLIR-Direct.ca 1.800.561.8187...
Page 7
™ The hottest things in the image are colored and everything else is greyscale. Color palette selection screen THE SCOUT TK HAS 9 USER SELECTABLE COLOR PALETTES. WHITE HOT GRADED FIRE 1 Most commonly used palette. Hot objects appear white. Good The hottest things in the image are colored with a gradient of for scenes with either high or low contrast.
Page 8
Exits the color palette menu Moves down through Quickly moves down the color palette options through the color by one increment palette options FLIR-DIRECT 4204190 - Rev 1 U S E R M A N U A L # info@FLIR-Direct.ca 1.800.561.8187...
Page 9
If the snapshot button is pressed before the previous image has been saved, the new snapshot image is buffered. The The FLIR SCOUT TK has internal storage for up to 4 hours of snapshot buffer can hold up to six images at a time. When the video.
Selects Current Item Moves down Quickly moves down through the menu through the menu by one increment 24-Hour Clock Enabled FLIR-DIRECT 4204190 - Rev 1 U S E R M A N U A L # info@FLIR-Direct.ca 1.800.561.8187...
Page 11
Current version of Lepton core software Battery: VX.XX.X Current version of battery management software Loader: VX.XX.X Current version of system bootloader Camera SN: XXXXXX Scout TK’s serial number Sensor SN: XXXXXX Lepton core’s serial number SOC: MA21XX Processor Type FLIR-DIRECT...
Page 12
Quickly scrolls down Cancels the images by through images deletion one increment in the Gallery Confirmation for deleting ALL images and videos FLIR-DIRECT 4204190 - Rev 1 U S E R M A N U A L # info@FLIR-Direct.ca 1.800.561.8187...
Warning dialogue box for low battery during update 4) Turn on your FLIR SCOUT TK 5) Connect your FLIR SCOUT TK to your computer using the USB cable provided 6) Locate and open the drive named “FLIR” on your computer 7) Copy the latest software files to the folder labeled “UPDATE”...
Page 14
Scout TK shuts down. After a thermal shutdown, the Scout TK will not turn on until the camera’s 9) It will take approximately 5 minutes for the software to load. The interior has returned to a safe operating temperature.
SECTION 6. SPECIFICATIONS 6.1 CURRENT SPECIFICATIONS CHART The table below contains the latest product specifications for the FLIR SCOUT TK; however, with all of our products as they evolve and are further developed these specifications are subject to change without notice.
Need help?
Do you have a question about the SCOUT TK and is the answer not in the manual?
Questions and answers