Profibus; Lonworks - Hitachi SJ300 Series Manual

®

PROFIBUS

Expansion Card
SJ-PBT
Specifications
Support profile
Transmission method
Connector type
Support file
ASIC chip
Maximum bus length
Maximum number of connectable nodes
Termination support
Support baud rate
Communication specification
Support LED
Connector specifications
Manufacturer
Phoenix Contact
Cable connection
No Signal name
1 NET-A NET-A input connection
2 NET-B NET-B input connection
3 Shield Cable shield connection
NET-A NET-A input connection
4
5 NET-B NET-B input connection
6 Shield Cable shield connection
Note: PROFIBUS is a registered trademark of
Profibus Nutzer Organization.
®

LONWORKS

Expansion Card
SJ-LW
Specifications
Device Class
Transmission method
Connector type
LonMark Object Support
Support file
Neuron Chip
Max. bus length
Max. length between nodes
Max. nodes number
Termination support
Support transmission baudrate
Data type
Support LED
Connector specifications
Manufacturer
Phoenix Contact
29
Variable Speed Drive (Order no. 3.072)
RS-485
Open connector (6 poles)
GSD file
VPC3+ (Made by Profichip)
100m at 12Mbps, 1200m at 9.6kbps(No rooter used for both conditions)
126 (Rooter used), 32(No rooter used)
Yes (Bus topology termination enable)
9.6kbps to 12Mbps (Baud rate auto-detecting function equipped)
Master/slave
Fieldbus ON/Off-line
Fieldbus diagnosis
Communication Status
Dimensional drawings
Model Code
MC 1.5/6-ST-3.81
11.1
Function
Variable Speed Drive
FTT-10A (Free Topology Twisted Pair Transceiver)
Open connector
0000-Node Object
6010-Variable Speed Motor Drive
XIF
TMPN3120FE5M
2700m
500m
32,385
FT (Free topology termination enable)
NO (Termination disable)
BUS (Bus topology termination enable)
78kbps (Fixed)
Pier to Pier
Power /Inverter
LON diagnosis/ Service
Communication Status
Model Code
MC 1.5/3-ST-3.81
[Unit: mm]
1
2.3
6.6
15.5
Dimensional drawings
11.1
6.6
15.5
LONWORKS is a registered trademark of Echelon Corporation
Cable connection
No Signal name
Shield
1 Cable shield connection
2 NET-A NET-A input connection
3 NET-B NET-B input connection
Note: Network function must be supported by the software of the inverter
used with SJ-DN, SJ-PBT, or SJ-LW.
For the detail, please contact Hitachi sales office.
2 3 4 5 6
3.81
19.05
23.65
[Unit: mm]
2.3
3.81
7.62
12.22
Function