Mitox 28MT Operator's Manual
  1. Manuals
  2. Brands
  3. Mitox Manuals
  4. Power Tool
  5. 28MT
  6. Operator's manual

Mitox 28MT Operator's Manual

Hide thumbs Also See for 28MT:
Table of Contents

Advertisement

Quick Links

www.mitox.co.uk
Operator's Manual
user manual, maintenance instructions and spare parts
28MT Multi-Tool
Read this manual carefully before operating the machine
Original Instructions Version June 16
28MTa_160616

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 28MT and is the answer not in the manual?

Questions and answers

Related Manuals for Mitox 28MT

Summary of Contents for Mitox 28MT

  • Page 1 Operator’s Manual user manual, maintenance instructions and spare parts 28MT Multi-Tool Read this manual carefully before operating the machine Original Instructions Version June 16 28MTa_160616...

  • Page 2: Product Description

    28MT Multi-Tool PRODUCT DESCRIPTION This Multi-Tool unit is a 2 stroke fast running power tool and is designed to be used in a domestic application with the attachments supplied. The Brushcutter attachment is designed for cutting grass and light brush, the Hedgetrimmer attachment for trimming new growth on hedges and the Pole Pruner for cutting up to 4”...

  • Page 3: Component Location

    28MT Multi-Tool Component Location Fuel tank – 2 stroke mixture. Engine starter/Recoil. Carburettor / air filter. Safety lever. Throttle control lever. Ignition switch. Harness hanger. Loop handle. J-Handle. Transmission shaft. Attachment shaft. Safety guard. Gear box. Nylon head. Optional cutting blade.

  • Page 4: Safety Symbols

    28MT Multi-Tool Safety Symbols Warning: Danger, Caution Read the documentation and safety instructions which are provided in this user manual. When operating this machine, use protective equipment such as goggles, helmet and ear defenders. Wear security shoes and gloves. Check the condition of the working area to avoid any accidents from hitting hidden obstacles such as stumps, stones, cans, or broken glass.

  • Page 5: Explanation Of Symbols On The Machine

    28MT Multi-Tool Taking Care of Warning Labels Always keep warning labels clean and free of scratches, which might make them illegible or difficult to read. If the warning labels provided with your Multi-Tool become damaged, peel off, or otherwise become illegible or difficult to read, order new labels from the authorised servicing dealer and replace the damaged labels.

  • Page 6: Safety Precautions

    Only approved Mitox accessories should be used with this product. This Multi-Tool is equipped with extremely sharp blades, always wear sturdy gloves when handling the blades and fit the safety guards when not in use.

  • Page 7: Work Clothing And Safety Equipment

    28MT Multi-Tool Never use the Multi-Tool in conditions as described below: When the ground is slippery or when other conditions exist which might make it difficult to maintain a steady posture while using the Multi-Tool. At night, at times of heavy fog, or at any other times when your field of vision is limited and it would be difficult to gain a clear view of the area where the Multi-Tool is to be used.

  • Page 8: Safe Handling Of Fuel

    28MT Multi-Tool Never hold the Multi-Tool in a way in which the cutting head is pointing towards someone else. Never allow the cutting head to come into contact with your body. Always turn off the engine before adjusting the Multi-Tool, or at any time when coming into close proximity with the cutting head.

  • Page 9: Before Starting The Engine

    28MT Multi-Tool Before Operating the Multi-Tool Before beginning work, carefully check the work area and remove any obstacles. Within a perimeter of 15 metres of the work area should be considered a hazardous area into which no-one should enter while the Multi-Tool is being used, and when necessary this area should be marked with a warning rope, warning signs, or other forms of warning.

  • Page 10: Avoid Noise Problems

    28MT Multi-Tool Avoid Noise Problems Check and follow the local regulations for sound levels and hours of operation for garden machinery. In general, operate Multi-Tools between 8 am and 5 pm on week days and 9 am to 5 pm at weekends.

  • Page 11: Two-Stroke Fuel

    NOTE Due to increased Ethanol content in petrol we recommend the use of B3C Ethanol Shield 2-Stroke Oil, or Ethanol Shield Fuel Stabiliser to protect your MITOX® engine against the harmful effects of Ethanol. Visit www.b3cfuel.co.uk for more information. Original Instructions Version June 16...
  • Page 12 28MT Multi-Tool Fuel Storage (Without Ethanol Shield) Mixed two-stroke fuel which has been left unused for a period of one month or more may damage the carburettor and result in the engine failing to start or operate correctly. When storing the Multi-Tool for a period of more than one month, empty the fuel tank, and run the engine to empty the carburettor of fuel.
  • Page 13 28MT Multi-Tool Installing the Loop Handle Assembly Upper Handle Drive Shaft To Engine Clamp Torx Bolt Drive Shaft To Cutter Head • Fit the upper handle to the shaft using the fixing holes to locate the handle to the desired position (smooth side of the handle facing away from the engine).

  • Page 14: Installing The Guard

    28MT Multi-Tool Assembly of the Brushcutter The blade fitted to the guard is sharp and can cause injury, always wear gloves. Installing the Guard • Place the Brushcutter with the head facing down. • Fit the shield using the bracket and 2 X Torx screws...
  • Page 15 28MT Multi-Tool Installing the Nylon Head • Lay the Brushcutter on its back with the gearbox shaft facing up. Rotate the gear box shaft until the hole Insert an Allen key or screwdriver into in the holder A lines up with the slot in the hole in the gearbox cover and into the metal guard.
  • Page 16 28MT Multi-Tool Installing the 3 Point Blade • Lay the Brushcutter on its back with the gearbox shaft facing up. Insert an Allen key or Rotate the screwdriver gear box shaft into the hole until the hole in the gearbox...
  • Page 17 28MT Multi-Tool Replacing the Nylon Cord Check to see if the nylon head is damaged before replacing the cord. If you can see serious traces of wear or damage, you must replace the complete nylon head. 1. Stop the engine.
  • Page 18 28MT Multi-Tool Using the Brushcutter Choosing the cutting device Choose the most suitable cutting device for the job to be done, according to these general indications: • The cutting line head can eliminate tall grass and non-woody vegetation • The 3-point blade is suitable for cutting brushwood and small shrubs up to 2 cm in diameter.

  • Page 19: Blade Information

    28MT Multi-Tool Assembly of the Hedgetrimmer NOTE The thickness of fresh growth (green branches), which may be cut using this hedgetrimmer, is limited to up to approximately 10mm. Never try to cut branches thicker than this, as doing so may result in damage to the hedgetrimmer.
  • Page 20 28MT Multi-Tool Operation Adjusting the angle of the cutting blades 1. Stop the engine. 2. Always wear gloves when adjusting the blades. 3. Lay the hedgetrimmer flat on the ground and set the guard (1) to the trimmer blade .
  • Page 21 28MT Multi-Tool Pole Pruner Attachment KICKBACK AND PINCHING SAFETY PRECAUTIONS Beware of kickback! • Kickback can occur whenever the tip of the guide bar touches an object while the saw is operating. Kickback may force the bar up and back towards the operator with speed! Beware of pinching.
  • Page 22 28MT Multi-Tool Assembly of the Pole Pruner Attaching the Pruning Mechanism • Remove the locating screw (1). • Using a T25 Torx key, loosen the clamping bolts (2). • Slide the drive shaft (3) into the gearbox until the locating hole (4) in the drive shaft is visible through the locating hole in the gearbox (5).
  • Page 23 28MT Multi-Tool The saw chain has very sharp edges. Use protective gloves for safety. • Loosen the nut (6), and remove the chain cover (8). • Mount the guide bar (1), then fit the saw chain around the bar and sprocket (4).

  • Page 24: Chain Oil

    28MT Multi-Tool Chain Oil Filling the Oil Reservoir • Fill the chain oil tank with low viscosity chain oil or Mitox Chain Oil this is availble online at www.mitox.co.uk or at your local dealer. NOTE • Do not use waste or regenerated oil that can cause damage to the oil pump.
  • Page 25 28MT Multi-Tool • When storing the pole pruner attachment, to prevent oil from seeping through the pump, either 1) Empty the oil tank. 2) Lay the pole pruner attachment with the tank facing down. Operation Adjusting the angle of the cutter head A.
  • Page 26 28MT Multi-Tool Maintenance of the Pruner Attachment Oiling Port • Dismount the guide bar and check the oiling port for blockage (1). Guide Bar • Remove sawdust in the bar groove (1) and the bar oiling port (2). • Grease the nose sprocket (3) from the...

  • Page 27: Saw Chain Sharpening

    28MT Multi-Tool Saw Chain Sharpening It is very important for smooth and safe operation to always keep the chain sharp. The chain needs to be sharpened when: • Sawdust becomes powder-like. • You need extra force to saw. • The cut does not go straight.
  • Page 28 28MT Multi-Tool Installing the Attachments to the Power Unit (or Optional Extension Shaft) Attachment Locking Clamp Locking pin shaft hole • Pull out the locking pin (1) and twist (2) to lock in the outer position (3). • Loosen the clamp by turning the handle (4).

  • Page 29: Operation

    28MT Multi-Tool Operation Keep clear of the cutter head as it may start moving when the engine starts. Starting the Engine CAUTION do not pull the starter cord all the way out and do not let go of the starter handle when the cord is extended, this can damage the starter mechanism.

  • Page 30: Stopping The Engine

    28MT Multi-Tool Fig 5 - Move the choke lever (e) to the Fig 6 - Pull the starter rope until the engine RUN ( ) position. starts, then squeeze the throttle briefly to release the fast idle control and return the engine to idle.

  • Page 31: Maintenance

    28MT Multi-Tool Running In During the first ten hours of work, avoid running the engine at maximum speed for a prolonged period until all the components have bedded in, after the engine has been run in, it will reach its maximum power.

  • Page 32: Safety Lock

    28MT Multi-Tool Carburettor The carburettor mixture setting has been set at the factory and will not need adjusting. Adjusting the idle speed: If adjustment is necessary turn the T screw (a) clockwise until the cutting head starts to move, then turn the T screw anticlockwise until the cutting head stops.

  • Page 33: Spark Plug

    28MT Multi-Tool Spark Plug 0.6 - 0.7mm Poor starting or misfiring is often caused by a fouled or defective spark plug, clean and reset the gap to 0.65 mm, or replace the spark plug with LD L8RTF; CHAMPION RCJ7Y; NGK BPMR7A as necessary.

  • Page 34: Troubleshooting

    28MT Multi-Tool Brushcutter Gear Case • Remove the bolt (a) on the gear case, top up the gearbox using Lithium grease and refit the bolt. Troubleshooting Engine will not start, power loss: • Check that the fuel tank is not empty. Fill with mixed fuel.

  • Page 35: Service Schedule

    28MT Multi-Tool Service Schedule Component Procedure Before Every Every 25 Every 50 Note Hours Hours Hours Fuel leaks / Wipe up spillage Fuel tank / Inspect / Replace if filter clean necessary Idle adjust See above Adjust screw carburettor if necessary...

  • Page 36: Specifications

    28MT Multi-Tool Specifications MODEL MITOX 28MT Engine Type Air cooled 2-stroke gasoline engine Model IE34F-4A Displacement : ( cm3) 25.4 cc Max. output 0.75 (kw) in accordance with ISO 8893 Idle speed: rpm (min 3100±400 –1) Max. rpm (min –1)
  • Page 37 28MT Multi-Tool Specifications EX-LRH (When used as a long reach hedge trimmer) Weight (Power Unit & Attachment) 7.31kg Weight (Attachment Only) 2.68kg Tooth Spacing 27mm Reduction ratio 4 : 1 Cutting head Type Reciprocating double blade Effective cut Length 510mm EX-PS (When used as a pruner saw) Weight (Power Unit &...
  • Page 38 28MT Multi-Tool Parts Diagram - Engine Original Instructions Version June 16 28MTa_160616...

  • Page 39: Parts List - Engine

    28MT Multi-Tool Parts List - Engine ID No. Part Number escription MIGB/T2671.2 M5X12 SCREW M5X12 MITBC261D.01.12.00-00 STARTER ASSEMBLY MIYD25.02.01-2 ROPE GUIDE MIYD25.02.00-5 STARTER ROPE MIYD62.02.00-3 STARTER HANDLE MITBC261D.01.12.00-5 RECOIL SPRING MITBC261D.01.12.00-4 RECOIL PULLEY MITBC261D.01.12.00-6 STARTER SPRING MITBC261D.01.12.00-7 RATCHET WHEEL MIGB/T97.1 M5 WASHER M5 MIGB/T845 ST4.8X16...
  • Page 40 28MT Multi-Tool Parts List - Engine ID No. Part Number escription MITBC260D.01.11.01-00 IGNITION COIL MIGB/T2671.2 M5X20 SCREW M5X20 MIGB/T119.2 5X10 PIN 5X10 MIGB/T2671.2 M5X25 SCREW M5X25 MIYD38-3.01.01.02-00 OIL SEAL 12X22X7 MITBC260D.01.10.00-00 FLYWHEEL MIGB/T6177.2 M8X1 NUT M8X1 MIGJB25D.01.00.00-15 WAVE SPRING WASHER MITBC260D.01.00.03-00...
  • Page 41 28MT Multi-Tool Parts List - Engine ID No. Part Number escription MITBC431D.01.00.00-12 STRAP MIGB/T845 ST3.5X9.5 ST SCREW 3.5X9.5 MIGB/T2671.2 M5X20 SCREW M5X20 MITBC261D.01.00.00-4 GASKET / CARBURETTOR MITBC261D.01.06.00-00 CARBURETTOR MITBC261D.01.08.00-00 AIR FILTER ASSEMBLY MIGB/T2671.2 M5X45 SCREW M5X45 MITBC261D.01.08.00-3 AIR BOX ASSEMBLY MITBC431D.01.13.01...

  • Page 42: Parts Diagram - Body

    28MT Multi-Tool Parts Diagram - Body Original Instructions Version June 16 28MTa_160616...
  • Page 43 28MT Multi-Tool Parts List - Body ID No. Part Number escription MITBC431D.02.00-3 CLAMP MITBC430D.03.02-00 HARNESS CLAMP ASSEMBLY MIGB/T2671.2 M5X20 SCREW M5X20 MITBC430D.03.00-2 CLAMP MIGB/T6170 M5 NUT M5 MITBC431SJ.03.02-00 OUTER SHAFT - UPPER MITBC431DJ.03.03-00 COUPLING ASSEMBLY MIGB/T2671.2 M5X25 SCREW M5X25 MIGB/T2671.2 M5X12...
  • Page 44 28MT Multi-Tool Parts List - Body ID No. Part Number escription MIGB/T276 6000-2Z BALL BEARING 6000-2Z MITBC430D.04.00-2 PINION MITBC431D.04.00-1 GEAR BOX MITBC430D.04.00-7 GUARD MIGB/T70.1 M5X8 SCREW M5X8 MIGB/T276 6000-2Z BALL BEARING 6000-2Z MITBC430D.04.00-4 GEAR MITBC431D.04.00-3 GEAR SHAFT MIGB/T276 6002-2Z BALL BEARING 6002-2Z MIGB/T893.1 32...
  • Page 45 28MT Multi-Tool Parts List - Body ID No. Part Number escription MIGB/T97.1 5X12X1.5 WASHER 5X12X1.5 MIGB/T97.1 5X11X2 WASHER 5X11X2 MIGB/T97.1 5X12X1.5 WASHER 5X12X1.5 MIGB/T845 ST4.8X19 TAPPING SCREW ST4.8X19 MI03.06.1.075 FOAM GRIP MITBC430DJ.03.00-1 DRIVE SHAFT MIGB/T6170 M5 NUT M5 MITBC431S.05.02-5 SPRING MITBC431S.05.02-8...
  • Page 46 28MT Multi-Tool Parts Diagram - Hedgetrimmer Original Instructions Version June 16 28MTa_160616...
  • Page 47 28MT Multi-Tool Parts List - Hedgetrimmer ID No. Part Number escription MIC26.1615.0100 RIGHT GEAR BOX ASSEMBLY MIC26.1615.0103 POSITIONAL PLATE MIGB/T97 M5 FLAT WASHER M5 MIGB/T93 M5 SPRING WASHER M5 MIGB/T2671.2 M5X16 SCREW M5X16 MIGB/T3452.1 34.5X1.8 O-RING 34.5X1.8 MIC26.1615.0201 LEFT GEAR BOX...
  • Page 48 28MT Multi-Tool Parts List - Hedgetrimmer ID No. Part Number escription MIGB/T2672 M5X25 SCREW M5X25 MIGB/T2671.2 M5X25 SCREW M5X25 MIGB/T2671.2 M5X18 SCREW M5X18 MIC26.1615.0302 MOUNTED PLATE MIC26.1615.0301 BLADE MIC26.1615.0303 BUSHING MIGB/T889.1 M5 NUT M5 MIB25.0119.0002 BLADE STRIP MIC43.1212.0001 LIMIT SLEEVE MIC43.0212.0001...
  • Page 49 28MT Multi-Tool Parts Diagram - Pole Pruner Original Instructions Version June 16 28MTa_160616...
  • Page 50 28MT Multi-Tool Parts List - Pole Pruner ID No. Part Number escription MITBC431DJ.03.01-00 FRONT SHAFT ASSEMBLY MIGB/T2671.2 M5X12 SCREW M5X12 MIC33.0614.0001 OIL TANK MIC33.0614.0002 OIL CAP MIC33.0614.0003 CHECK VALVE MIC33.0614.0004 FUEL HOSE CONNECTOR MIC33.0614.0005 OIL TUBE MIC33.0614.0006 FUEL HOSE SPRING MIC33.0614.0100...
  • Page 51 28MT Multi-Tool Parts List - Pole Pruner ID No. Part Number escription MIC33.0614.0019 M10 PIN GUIDING NUT MIC33.0614.0020 HANDLE PIN MIC33.0614.0021 GUIDE BLOCK MIGB/T2671.2 M5X25 SCREW M5X25 MIGB/T2671.2 M5X12 SCREW M5X12 MITBC430DJ.03.00-1 DRIVER SHAFT MITBC431DJ.03.01-2 LIMIT SLEEVE MIC26.0614.0013 BAR COVER MI03.06.1.075...

  • Page 52: Ec Declaration Of Conformity

    28MT Multi-Tool EC Declaration of Conformity We Mitox (Rochford Garden Machinery Ltd) - BA9 9RS (importer) declare that the product(s): Designation: Petrol Powered Brushcutter / Hedgetrimmer / Pole Pruner Model(s): MITOX 28MT SELECT Type/Serial No: As per rating label on machine...
  • Page 53 28MT Multi-Tool Original Instructions Version June 16 28MTa_160616...
  • Page 54 28MT Multi-Tool Original Instructions Version June 16 28MTa_160616...
  • Page 55 28MT Multi-Tool Original Instructions Version June 16 28MTa_160616...
  • Page 56 The manufacturer undertakes to replace any spare parts that are classified as defective by an appointed Mitox service dealer. The manufacturer will not accept liability for the replacement of the machine, either partially or wholly, and /or consequential damages and /or interest charges either directly or indirectly.

Table of Contents

Save PDF