Philips DL8781 User Manual page 14

English
14
1 Step onto the scale barefoot to switch it on. The device beeps to indicate
it is ready for weighing.
- You can take a measurement barefoot. That way the device is able
to perform the weight measurement and the BIA measurement and later
on store the measurement data in the health app. Make sure your feet
are clean and slightly damp.
- You can also take a measurement wearing footwear. That way the scale
is only able to perform the weight measurement and not the body fat
estimation and BMI calculation. Your measurement results will not be
stored nor sent to the health app.
2 Weight measurement starts.
-
Weight is shown on the display of the device after weight
measurement ends.
3 BIA measurement starts (when measuring barefoot).
-
The symbol 'BIA' flashes on the display to indicate the device is
analyzing your data.
4 Stand still and keep full contact with the measurement platform until the
symbol 'BIA' stops flashing. The device beeps to indicate that the
measurement is completed. The results of the BIA measurement will not
be shown on the display.
5 The device is equipped with user profile recognition and automatically
selects the user based on their weight.
-
When the device immediately displays the weight: no user is
recognized and results are not stored. See below for instructions.
-
When the device shows multiple users: more users are recognized
based on your weight. See below for instructions.
6 The measurement results are stored in the device in case of a successful
BIA measurement.
-
The device can store up to 40 measurement results for each user
profile. The oldest results will be replaced by new measurement
results.
7 After measuring, step off the device. It switches off automatically.
When the device does not automatically recognize the correct
user profile: