Table of Contents
Advertisement
Chapter 2 Installation and Connection
Safety installation instruction:
1) Multiple pile
The maximum 5 IP-900E/IP-900D/IP-900IID can be piled under the
environment
maintenance-ability. When IP-900E/IP-900D/IP-900IID are piled, please fix
them to avoid to fall (Do not cover the air intake.). See Section 2.1.4,
"Open space required around this equipment" for the installation space.
2) rack mounting
a) When IP-900E/IP-900D/IP-900IID is installed in a closed or multi-unit
b) The installation of IP-900E/IP-900D/IP-900IID in a rack should be
c) The mounting of IP-900E/IP-900D/IP-900IID in a rack should be such
d) When using a bracket for mounting two products and you remove one
IP-900E/IP-900D/IP-900IID
condition
rack, the operating ambient temperature inside of the rack
environment may be greater than room ambient.
consideration should be given to operate in the environment
compatible with the specifications in Appendix 2.2 "Environment
Specifications."
The consideration for adjustment of the air condition like air
-
circulation should be given to prevent the internal rack ambient
from exceeding the maximum operating ambient temperature of
IP-900E/IP-900D/IP-900IID.
The
maximum
-
IP-900E/IP-900D/IP-900IID: 55°C.
such that the amount of airflow required for safe operation of
IP-900E/IP-900D/IP-900IID is not compromised.
-
IP-900E/IP-900D/IP-900IID has ventilation opening at the right
and rear side.
-
Do not cover or close these ventilation openings to prevent
overheating.
that a hazardous condition in not archived due to uneven mechanical
loading. To keep stability of the entire rack, please fix the rack to
wall or floor by suitable means.
-
Be
careful
IP-900E/IP-900D/IP-900IID into rack.
-
Do not install IP-900E/IP-900D/IP-900IID into your rack where
IP-900E/IP-900D/IP-900IID may make the entire rack unstable.
-
The weight of IP-900E/IP-900D/IP-900IID with the maximum
configuration: 2.3 kg
product, do not leave the remaining one that is fixed at one end only
unattended. If you apply pressure to a product that is supported at
one end only, it may deform the mounting bracket.
specified.
Please
operating
ambient
about
injury
during
32
install
considering
Therefore, the
temperature
for
installation
the
of
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
