Stryker SV2 Maintenance Manual
  1. Manuals
  2. Brands
  3. Stryker Manuals
  4. Medical Equipment
  5. SV2
  6. Maintenance manual

Stryker SV2 Maintenance Manual

Electric hospital bed
Hide thumbs Also See for SV2:
Table of Contents

Advertisement

Quick Links

SV2 Electric Hospital Bed
7500
Maintenance Manual
2017/08
SK-7500 REV 00
www.stryker.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SV2 and is the answer not in the manual?

Questions and answers

Related Manuals for Stryker SV2

Summary of Contents for Stryker SV2

  • Page 1 SV2 Electric Hospital Bed 7500 Maintenance Manual 2017/08 SK-7500 REV 00 www.stryker.com...
  • Page 2 sample text...
  • Page 3 Do not insert lift pole Headboard and footboard orientation Do not store items under the bed. Gatch positioning Catalogue number Serial number CE mark Manufacturer Mass of equipment with safe working load Safe working load Maximum patient weight Adult patient www.stryker.com SK-7500 REV 00...
  • Page 4 Equipment (WEEE), this symbol indicates that the product must not be disposed of as unsorted municipal waste, but should be collected separately. Contact your local distributor for disposal information. See the maintenance manual for servicing instructions and recyclable components. SK-7500 REV 00 www.stryker.com...

  • Page 5: Table Of Contents

    Bed extender assembly ..........................82 Hi-Lo actuators ............................84 Control box and battery ..........................85 Litter fowler (backrest) assembly........................ 86 Litter seat assembly..........................88 Litter gatch (legrest) assembly ........................89 Fowler (backrest) actuator ........................91 Gatch (legrest) actuator ........................... 92 www.stryker.com SK-7500 REV 00...
  • Page 6 Siderail head end assembly........................93 Siderail foot end assembly ........................94 Siderail assembly ............................ 95 Siderail release latch assembly ........................96 Headboard and footboard assembly ......................97 EMC information ............................. 98 Warranty ............................. 102 Recycling passports..........................103 SK-7500 REV 00 www.stryker.com...

  • Page 7: Warning/Caution/Note Definition

    Note: Provides special information to make maintenance easier or important instructions clearer. www.stryker.com SK-7500 REV 00...

  • Page 8: Summary Of Safety Precautions

    If you do not properly rinse and dry the product, you may leave a corrosive residue on the surface of the product that could cause premature corrosion of critical components. Failure to follow these cleaning instructions may void your warranty. SK-7500 REV 00 www.stryker.com...

  • Page 9: Pinch Points

    Summary of safety precautions Pinch points Figure 1: SV2 pinch points www.stryker.com SK-7500 REV 00...

  • Page 10: Preventive Maintenance

    Preventive maintenance At a minimum, check all items listed during annual preventive maintenance for all Stryker Medical products. You may need to perform preventive maintenance checks more frequently based on your level of product usage. Remove product from service before performing preventive maintenance. Preventive maintenance should only be performed by trained or certified personnel.
  • Page 11 Preventive maintenance Product serial number: Completed by: Date: www.stryker.com SK-7500 REV 00...

  • Page 12: Cleaning

    Using a clean, soft, damp cloth, wipe product surfaces with a mild soap and water solution to remove foreign material. Wipe product surfaces with a clean, dry cloth to remove any excess liquid or cleaning agent. Dry thoroughly. SK-7500 REV 00 www.stryker.com...

  • Page 13: Cleaning The Siderails

    Do not use acid-based chemicals or flammable chemicals, such as gasoline, diesel, or acetone for cleaning purposes. To clean the siderails: Raise the siderail. Latch the siderail. Use a clean, soft, damp cloth to wipe down the siderail and the siderail control panel. Allow the siderail control panel to dry thoroughly. www.stryker.com SK-7500 REV 00...

  • Page 14: Disinfecting

    To disinfect mechanisms, lift the backrest and leg rest up to the highest height. Wipe product surfaces and mechanisms with a clean, dry cloth to remove any excess liquid or cleaning agent. Allow the product to dry completely before returning to service. SK-7500 REV 00 www.stryker.com...

  • Page 15: Troubleshooting

    Power is possibly disconnected and 1. Power cable might have come slowly the bed operates by battery. out of the control panel; check it. 2. Check the connections of the power cable. 3. Check the socket. www.stryker.com SK-7500 REV 00...
  • Page 16 7. Failure mode does not result in a position lost. Make sure that the system is in a safe position after resetting the failure mode. 8. Continue to troubleshoot through possible causes until corrected. SK-7500 REV 00 www.stryker.com...
  • Page 17 Troubleshooting www.stryker.com SK-7500 REV 00...

  • Page 18: Quick Reference Replacement Parts

    Quick reference replacement parts These parts are currently available for purchase. Call Stryker Customer Service: + 90 (352) 321 43 00 (pbx) for availability and pricing. Kit name Number Kit contents Quantity Number Name Actuator kit, Fowler YM-KIT-100049 HM-11-31 Ø 10 rue clip...
  • Page 19 Ø13 rue segman HM-06-001 M6 x 25 mushroom head square neck bolt Caster kit, dual YM-KIT-100041 HM-01-86 2946USP150R36- wheel no steer lock, 32S30 D RAL 9002 antistatic (150 mm) 4XM6 TENTE 150 mm double no steer www.stryker.com SK-7500 REV 00...
  • Page 20 HM-01-26 2946UAP150R36- wheel no steer lock, 32S30 D RAL 9002 not antistatic (150 4XM6 TENTE 150 mm double no steer lock not antistatic caster (Stryker) HM-05-106 M6*16 imbus bolt HM-09-30 M6 toothed washer (DIN 6797 A) HM-11-34 Ø13 rue clip...
  • Page 21 HM-09-30 M6 toothed washer (DIN 6797 A) HM-11-34 Ø13 rue clip YM-HM-02-71 12 thick PLS washer DMR071 YM-HM-02-299 50*50 caster profile cap PLS (lower chasis PLS) 51 mould HM-11-10 11 mm Snap ring (lipper) KMS starlock www.stryker.com SK-7500 REV 00...
  • Page 22 11 mm Snap ring (lipper) KMS starlock push on BV/6706 fastener Caster kit, Ø 150 YM-KIT-100048 HM-01-84 Ø150 integral, steer steer lock, not lock, not antistatic antistatic single single caster- 2044UAP150R36- 32S30 HM-05-106 M6*16 imbus bolt SK-7500 REV 00 www.stryker.com...
  • Page 23 M8 self-lock hex nut HM-05-048 M8*60 hexagon socket button head screw Control box YM-KIT-100040 HM-05-010 M6*50 steel bolt replacement kit HM-07-01 M6 metal standard washer (large) 1/4 washer HM-08-05 M6 fibered nut HM-17-373 SV2 control box CB6777-00 www.stryker.com SK-7500 REV 00...
  • Page 24 Number Name Footboard kit with YM-KIT-100033 YM-FTRBASLIK-MN1 Future polypropylene logo, dark blue bed head and foot assembly HM-20-870 SV2 dark blue (Stryker) foot end bed head color sticker with Stryker logo HM-22-1780 3M primer 94 handkerchief Footboard- YM-KIT-100005 YM-FTRBASLIK-MN1 Future polypropylene...
  • Page 25 Quick reference replacement parts Kit name Number Kit contents Quantity Number Name head color sticker with Stryker logo HM-20-871 SV2 dark blue (Stryker) head color sticker HM-20-872 SV2 dark blue (Stryker) upper right siderail color sticker HM-20-873 SV2 dark blue (Stryker) upper left...
  • Page 26 07 wood color future siderail color, foot left HM-20-758 07 wood color future bed head color HM-22-1780 3M primer 94 handkerchief SV2 nurse control YM-KIT-100060 HM-16-03 Ø25 clips (UB250C- pendant kit N 245x4,6 cable connector) HM-17-103 0964541 Linak supervisor spiral...
  • Page 27 HM-17-024 Type B Taiwan Power cord YM-KIT-100066 HM-16-03 Ø25 clips (UB250C- replacement kit, type N 245x4,6 cable B coiled (Philippines) connector) YM-HM-02-041 Ø8,5 Plastic cable holder HM-06-09 Ø3,9 x 25 Countersunk milling www.stryker.com SK-7500 REV 00...
  • Page 28 Korean, coiled black Power cord YM-KIT-100070 HM-16-03 Ø25 clips (UB250C- replacement kit, type N 245x4,6 cable E/F schuko coiled connector) orange (Europe) YM-HM-02-040 Ø7 Plastic cable holder HM-06-09 Ø3,9 x 25 Countersunk milling head self drilling screw SK-7500 REV 00 www.stryker.com...
  • Page 29 Type I Argentina straight black Power cord YM-KIT-100074 HM-16-03 Ø25 clips (UB250C- replacement kit, type N 245x4,6 cable I straight black connector) (Australia) YM-HM-02-040 Ø7 Plastic cable holder HM-06-09 Ø3,9 x 25 Countersunk milling head self drilling screw www.stryker.com SK-7500 REV 00...
  • Page 30 HM-16-03 Ø25 clips (UB250C- replacement kit, type N 245x4,6 cable L straight black (Italy) connector) YM-HM-02-040 Ø7 Plastic cable holder HM-06-09 Ø3,9 x 25 Countersunk milling head self drilling screw HM-17-040 Type L Italy straight black SK-7500 REV 00 www.stryker.com...
  • Page 31 Backrest siderail gas YM-KIT-100010 HM-11-18 Q8 capped snap ring cylinder kit (DT/6671/43A) HM-12-146 12-146 8 x 31 mm side rail pin HM-18-27 Future side rail shock absorber 640015004 HM-05-018 M8*90 half thread steel bolt www.stryker.com SK-7500 REV 00...
  • Page 32 2 mm plastic washer (10 mm plastic washer) mould NO HM-12-FTR005 Shock absorber connection pin Siderail kit, foot end YM-KIT-100052 YM-02-142-MN1 SV2 Left foot siderail left assembly HM-12-FTR005 12-FTR005 shock absorber connection HM-02-283 2 mm plastic washer (10 mm plastic...
  • Page 33 Kit contents Quantity Number Name HM-20-394 Warning, crushing of hands label Siderail kit, foot end YM-KIT-100052-B YM-02-142-MN1 SV2 Left foot siderail left, dark blue assembly HM-12-FTR005 12-FTR005 shock absorber connection HM-02-283 2 mm plastic washer (10 mm plastic washer) mould NO...
  • Page 34 Warning, crushing of hands label HM-20-762 08 dark wood future siderail color foot left YM-KIT-100052-L YM-02-142-MN1 Siderail kit, foot end SV2 Left foot siderail left, light wood assembly HM-12-FTR005 12-FTR005 shock absorber connection HM-02-283 2 mm plastic washer (10 mm plastic...
  • Page 35 Quick reference replacement parts Kit name Number Kit contents Quantity Number Name Siderail kit, foot end YM-KIT-100052-W YM-02-142-MN1 SV2 Left foot siderail left, wood assembly HM-12-FTR005 12-FTR005 shock absorber connection HM-02-283 2 mm plastic washer (10 mm plastic washer) mould NO...
  • Page 36 HM-22-1780 3M primer 94 handkerchief HM-20-394 Warning, crushing of hands label Siderail kit, foot end YM-KIT-100053-B YM-02-144-MN1 SV2 Right foot right, dark blue siderail assembly HM-12-FTR005 12-FTR005 shock absorber connection HM-02-283 2 mm plastic washer (10 mm plastic washer) mould NO...
  • Page 37 Warning, crushing of hands label HM-20-761 08 dark wood future siderail color foot right Siderail kit, foot end YM-KIT-100053-L YM-02-144-MN1 SV2 Right foot right, light wood siderail assembly HM-12-FTR005 12-FTR005 shock absorber connection HM-02-283 2 mm plastic washer (10 mm plastic...
  • Page 38 Warning, crushing of hands label HM-20-751 06 light wood future siderail color foot right Siderail kit, foot end YM-KIT-100053-W YM-02-144-MN1 SV2 Right foot right, wood siderail assembly HM-12-FTR005 12-FTR005 shock absorber connection HM-02-283 2 mm plastic washer (10 mm plastic...
  • Page 39 Kit name Number Kit contents Quantity Number Name Siderail kit, head end YM-KIT-100054 YM-02-141-MN2 SV2 Back left siderail left with unit assembly with unit HM-22-1780 3M primer 94 handkerchief HM-02-283 2 mm plastic washer (10 mm plastic washer) mould NO...
  • Page 40 HM-20-873 SV2 dark blue (Stryker) upper left siderail color sticker Siderail kit, head end YM-KIT-100054-D YM-02-141-MN2 SV2 Back left siderail left with unit, dark assembly with unit wood HM-22-1780 3M primer 94 handkerchief HM-02-283 2 mm plastic washer...
  • Page 41 Warning, crushing of hands label HM-20-760 08 dark wood future siderail color back left Siderail kit, head end YM-KIT-100054-L YM-02-141-MN2 SV2 Back left siderail left with unit, light assembly with unit wood HM-22-1780 3M primer 94 handkerchief HM-02-283 2 mm plastic washer...
  • Page 42 Warning, crushing of hands label HM-20-755 07 wood color future siderail color back left Siderail kit, head end YM-KIT-100055 YM-02-143-MN2 SV2 Back right right with unit siderail assembly with unit HM-22-1780 3M primer 94 handkerchief HM-02-283 2 mm plastic washer...
  • Page 43 YM-HM-02-029 Side board lock plastic-short HM-20-394 Warning, crushing of hands label Siderail kit, head end YM-KIT-100055-B YM-02-143-MN2 SV2 Back right right with unit, dark siderail assembly blue with unit HM-22-1780 3M primer 94 handkerchief HM-02-283 2 mm plastic washer...
  • Page 44 Quick reference replacement parts Kit name Number Kit contents Quantity Number Name HM-20-872 SV2 dark blue (Stryker) upper right siderail color sticker YM-KIT-100055-D YM-02-143-MN2 Siderail kit, head end SV2 Back right right with unit, dark siderail assembly wood with unit...
  • Page 45 Warning, crushing of hands label HM-20-749 06 light wood future siderail color back right Siderail kit, head end YM-KIT-100055-W YM-02-143-MN2 SV2 Back right right with unit, wood siderail assembly with unit HM-22-1780 3M primer 94 handkerchief HM-02-283 2 mm plastic washer...
  • Page 46 HM-20-754 07 wood color future siderail color back right Siderail kit, head end YM-KIT-100056 YM-02-141-MN4 SV2 Back left siderail left W/O unit assembly w/o unit HM-22-1780 3M primer 94 handkerchief HM-02-283 2 mm plastic washer (10 mm plastic...
  • Page 47 Quick reference replacement parts Kit name Number Kit contents Quantity Number Name Siderail kit, head end YM-KIT-100056-B YM-02-141-MN4 SV2 Back left siderail left W/O unit, dark assembly w/o unit blue HM-22-1780 3M primer 94 handkerchief HM-02-283 2 mm plastic washer (10 mm plastic...
  • Page 48 Warning, crushing of hands label HM-20-760 08 dark wood future siderail color back left YM-KIT-100056-L YM-02-141-MN4 Siderail kit, head end SV2 Back left siderail left W/O unit, light assembly w/o unit wood HM-22-1780 3M primer 94 handkerchief HM-02-283 2 mm plastic washer...
  • Page 49 Name HM-20-750 06 light wood future siderail color back left YM-KIT-100056-W YM-02-141-MN4 Siderail kit, head end SV2 Back left siderail left W/O unit, wood assembly w/o unit HM-22-1780 3M primer 94 handkerchief HM-02-283 2 mm plastic washer (10 mm plastic...
  • Page 50 YM-HM-02-029 Side board lock plastic-short HM-20-394 Warning, crushing of hands label Siderail kit, head end YM-KIT-100057-B YM-02-143-MN4 SV2 Back right right W/O control siderail assembly w/o panel, dark blue unit HM-22-1780 3M primer 94 handkerchief HM-02-283 2 mm plastic washer...
  • Page 51 Number Kit contents Quantity Number Name HM-20-394 Warning, crushing of hands label HM-20-872 SV2 dark blue (Stryker) upper right siderail color sticker Siderail kit, head end YM-KIT-100057-D YM-02-143-MN4 SV2 Back right right W/O control siderail assembly w/o panel, dark wood...
  • Page 52 Warning, crushing of hands label HM-20-749 06 light wood future siderail color back right Siderail kit, head end YM-KIT-100057-W YM-02-143-MN4 SV2 Back right right W/O control siderail assembly w/o panel, wood unit HM-22-1780 3M primer 94 handkerchief HM-02-283 2 mm plastic washer...
  • Page 53 HM-20-394 Warning, crushing of hands label HM-20-754 07 wood color future siderail color back right YM-KIT-100058 YM-02-141-MN3 Siderail kit, SV2-50 SV2-50 back left head end left with siderail assembly unit with unit HM-22-1780 3M primer 94 handkerchief HM-02-283 2 mm plastic washer...
  • Page 54 YM-HM-02-029 Side board lock plastic-short HM-20-557 Ø15 clips HM-20-394 Warning, crushing of hands label HM-20-873 SV2 dark blue (Stryker) upper left siderail color sticker Siderail kit, SV2-50 YM-KIT-100058-D YM-02-141-MN3 SV2-50 back left head end left with siderail assembly unit, dark wood...
  • Page 55 HM-20-557 Ø15 clips HM-20-394 Warning, crushing of hands label HM-20-760 08 dark wood future siderail color back left Siderail kit, SV2-50 YM-KIT-100058-L YM-02-141-MN3 SV2-50 back left head end left with siderail assembly unit, light wood with unit HM-22-1780 3M primer 94...
  • Page 56 Ø15 clips HM-20-394 Warning, crushing of hands label HM-20-750 06 light wood future siderail color back left YM-KIT-100058-W YM-02-141-MN3 Siderail kit, SV2-50 SV2-50 back left head end left with siderail assembly unit, wood with unit HM-22-1780 3M primer 94 handkerchief HM-02-283...
  • Page 57 Side board lock plastic-long YM-HM-02-029 Side board lock plastic-short HM-20-557 Ø15 clips HM-20-394 Warning, crushing of hands label Siderail kit, SV2-50 YM-KIT-100059-B YM-02-143-MN3 SV2-50 back right head end right with siderail assembly unit, dark blue with unit HM-22-1780 3M primer 94...
  • Page 58 YM-HM-02-029 Side board lock plastic-short HM-20-557 Ø15 clips HM-20-394 Warning, crushing of hands label HM-20-872 SV2 dark blue (Stryker) upper right siderail color sticker Siderail kit, SV2-50 YM-KIT-100059-D YM-02-143-MN3 SV2-50 back right head end right with siderail assembly unit, dark wood...
  • Page 59 Kit name Number Kit contents Quantity Number Name HM-20-759 08 dark wood future siderail color back right Siderail kit, SV2-50 YM-KIT-100059-L YM-02-143-MN3 SV2-50 back right head end right with siderail assembly unit, light wood with unit HM-22-1780 3M primer 94...
  • Page 60 Side board lock plastic-short HM-20-557 Ø15 clips HM-20-394 Warning, crushing of hands label HM-20-754 07 wood color future siderail color back right Under bed light YM-KIT-100086 HM-17-297 Under bed light UBL2 replacement kit HM-06-112 2,9*16 sheet metal screw SK-7500 REV 00 www.stryker.com...

  • Page 61: Service

    Note: Make sure that the cable ties stay in the same position during reinstallation. 14. Verify proper operation of the product before returning it to service. Gatch (legrest) actuator replacement Tools required: • Small flat screwdriver www.stryker.com SK-7500 REV 00...

  • Page 62: Head End Lift Actuator Replacement

    Head end lift actuator replacement Tools required: • Small flat screwdriver • Needle nose pliers Procedure: Apply the brakes. Support the head end litter cross brace (A) to support the head end litter (Figure 4 on page 59). SK-7500 REV 00 www.stryker.com...

  • Page 63: Foot End Lift Actuator Replacement

    10. Reverse steps to reinstall. 11. Verify proper operation of the product before returning it to service. Figure 4: Head end lift actuator Foot end lift actuator replacement Tools required: • Small flat screwdriver • Needle nose pliers www.stryker.com SK-7500 REV 00...
  • Page 64 (Figure 5 on page 60). Remove and discard the foot end lift actuator. 10. Reverse steps to reinstall. 11. Verify proper operation of the product before returning it to service. Figure 5: Foot end lift actuator SK-7500 REV 00 www.stryker.com...

  • Page 65: Non-Steer Caster Replacement

    Always make sure to line the hex shaft with the hex in the caster. Test the caster to identify the direction of the brake. Damage may occur if you install the caster incorrectly. Note: Torque the caster mounting screws (I) to 9.5 Nm +/- 1.5 Nm. 12. Verify proper operation of the product before returning it to service. www.stryker.com SK-7500 REV 00...

  • Page 66: Steer (Head Left) Caster Replacement

    Raise the product to the highest height position. Unplug the power cord from the wall outlet. Using needle nose pliers, remove and discard the rue ring cotter pin (G) from the hex shaft (Figure 7 on page 63). SK-7500 REV 00 www.stryker.com...
  • Page 67 Damage may occur if you install the caster incorrectly. Note: Torque the caster mounting screws (I) to 9.5 Nm +/- 1.5 Nm. 12. Verify proper operation of the product before returning it to service. Figure 7: Steer caster www.stryker.com SK-7500 REV 00...

  • Page 68: Fifth Wheel Replacement

    Remove the pivot pin (B) (Figure 8 on page 65). Remove and discard the head end siderail gas cylinder (C). Reverse steps to reinstall. 10. Verify proper operation of the product before returning it to service. SK-7500 REV 00 www.stryker.com...

  • Page 69: Foot End Siderail Gas Cylinder Replacement

    66). Remove and discard the pivot pin (B) and foot end siderail gas cylinder (C) (Figure 9 on page 66). Reverse steps to reinstall. 10. Verify proper operation of the product before returning it to service. www.stryker.com SK-7500 REV 00...

  • Page 70: Lower Leg Section Locking Mechanism Replacement

    (Figure 10 on page 67). Remove and discard the lower leg section locking mechanism (B) (Figure 10 on page 67). Reverse steps to reinstall. 10. Verify proper operation of the product before returning it to service. SK-7500 REV 00 www.stryker.com...

  • Page 71: Patient Control Pendant Replacement

    Unplug the patient control pendant cable from the junction box. Dispose of the patient control pendant. Reverse steps to reinstall. Verify proper operation of the product before returning it to service. Nurse control pendant replacement Tools required: • Diagonal pliers www.stryker.com SK-7500 REV 00...

  • Page 72: Siderail Control Panel (Inside And Outside Siderail) Replacement

    Using a small flat screwdriver, un-clip the actuator cable retainer (A) from the control box (Figure 11 on page 69). Remove and save the actuator cable retainer. Using a small flat screwdriver, push in on the power cord lock and gently pull outward on the power cord. SK-7500 REV 00 www.stryker.com...

  • Page 73: Battery Replacement

    Using a #2 Phillips screwdriver, unscrew the four screws (A) that secure the battery to the litter frame (Figure 12 on page 70). Note: Support the battery while removing the screws so the battery does not fall. Remove the battery. www.stryker.com SK-7500 REV 00...

  • Page 74: Power Cord Replacement

    (Figure 13 on page 71). Remove and discard the external power cord (C) from the internal power cord (Figure 13 on page 71). Reverse steps to reinstall. Verify proper operation of the product before returning it to service. SK-7500 REV 00 www.stryker.com...

  • Page 75: Head End Siderail Hoop Replacement

    Note: Support the siderail hoop while removing the screws so the siderail hoop does not fall. 13. Remove and discard the siderail hoop. 14. Reverse steps to reinstall. 15. Verify proper operation of the product before returning it to service. www.stryker.com SK-7500 REV 00...

  • Page 76: Foot End Siderail Hoop Replacement

    Note: Support the siderail hoop while removing the screws so the siderail hoop does not fall. Remove and discard the siderail hoop. 10. Reverse steps to reinstall. 11. Verify proper operation of the product before returning it to service. SK-7500 REV 00 www.stryker.com...

  • Page 77: Brake System

    Item Number Name YM-FUTUREBALT-003-BY 5. wheel compatible lower chassis white YM-03-04-10-0760-HZR- Ø11 hexagon rod 760 mm with hole YM-FUTUREBAKT-003-BY Future LB 5. wheel compatible transfer white HM-01-83 150 mm no steer lock antistatic single integral wheel www.stryker.com SK-7500 REV 00...
  • Page 78 HM-06-001 M6 x 25 mushroom head square neck bolt HM-12-905 Transfer laser bush (bronze) HM-08-05 M6 fibered nut YM-04-142-BY 5. wheel - base frame connection sheet YM-HM-02-025 Transfer bar Ø8 plastic hole cap SK-7500 REV 00 www.stryker.com...
  • Page 79 Brake system Quantity Item Number Name HM-09-30 M6 toothed washer (DIN 6797 A) HM-11-10 11 mm Snap ring (lipper) KMS starlock push on BV/6706 fastener www.stryker.com SK-7500 REV 00...

  • Page 80: Base And Leg Assembly

    Main mechanism without hole HM-12-FTR007 Ø14 bush main mechanism HM-05-153 M10x35 mm socket button head screw YM-HM-02-398 Ø18 bush main mechanism HM-09-18 Ø10 rivet nut YM-HM-02-396 Main mechanism sled delrin HM-05-54 M10x16 hex socket head cap screw SK-7500 REV 00 www.stryker.com...
  • Page 81 Base and leg assembly Quantity Item Number Name HM-08-07 M10 prevailing torque type hexagon nut YM-FUTURELBANA-002- Main mechanism with hole YM-HM-02-399 Ø14 plastic washer YM-04-FTR011-HZR-BY Main mechanism Z laser cut sheet www.stryker.com SK-7500 REV 00...

  • Page 82: Base And Leg Assembly With 5Th Wheel (Option)

    M6 rivet nut HM-05-041 M6*30 hexagon socket button head screw YM-04-142-BY Fifth wheel-base frame connection sheet HM-11-35 Ø8 rue clip HM-12-004 Ø8 perforated pin YM-HM-02-026 8,5 x 16 x 2,2 mm plastic washer HM-07-22 M6 steel washer (small) SK-7500 REV 00 www.stryker.com...

  • Page 83: Litter / Frame Assembly

    HM-08-07 M10 prevailing torque type hexagon nut HM-06-09 3,9x25 mm cross recessed countersunk head tapping screw YM-HM-02-408 Backrest support plastic YM-FUTURELBUST-002- SV2 prolonged top chassis 00-BY white YM-HM-02-34 30x50x2 mm profile spile HM-20-840 Extension lock YM-16-49-03 25x25x360 mm cable holder HM-12-FTR011 Ø14xØ10x41 mm pin...
  • Page 84 Item Number Name YM-16-49-06 25x25x100 mm cable holder YM-16-49-04 25x25x200 mm cable holder YM-16-49-01 25x25x550 mm cable holder YM-16-49-02 25x25x730 mm cable holder YM-HM-02-56 Buffer HM-06-49 Cross recessed countersunk head tapping screw YM-039-004-00-MN Bed extension assembly SK-7500 REV 00 www.stryker.com...

  • Page 85: Bumper Roller Assembly

    YM-04-322-HZR-1 (right side) Detachable bumper chassis to main chassis YM-04-322-HZR connection arm (left side) 45 x 2 x 150 mm bumper YM-03-01-01-01250-HZR chassis side tubes Main bumper profile 40 x YM-03-02-41-877-HZR1 60 x 877 mm www.stryker.com SK-7500 REV 00...

  • Page 86: Bed Extender Assembly

    Plastic linen tray YM-UZTMSLTTC-001 Bolster mattress retainers HM-06-82 M14 x 12 mm Phillips screw YM-UZTMCIRT-MN Bolster mattress Velcro® HM-06-63 M14 x 16 mm Phillips screw YM-HM-02-413 Accessory socket sleeve HM-02-354 Future bumper HM-12-FTR001 12-FT001 future bumper SK-7500 REV 00 www.stryker.com...
  • Page 87 Litter frame plastic end caps YM-HM-02-415 Bed extender block stops YM-04-FTR023-HZR-BY HPL extension mounting bracket YM-04-FTR022-HZR-BY HPL extension mounting bracket HM-06-02 Ø3.9 x 13 mm Phillips screw HM-08-19 M4 x .7 nylock nut HM-03-04-03-0650-HZR- Ø8 mm linen tray bar www.stryker.com SK-7500 REV 00...

  • Page 88: Hi-Lo Actuators

    Hi-Lo actuators Quantity Item Number Name Ø14xØ10x41 mm pin HM-12-FTR011 8000 N LA40 150 mm HM-17-304 stroke actuator Ø10 rue clip HM-11-31 Ø14xØ10x65 mm actuator HM-12-FTR010 connection pin Actuator pin fixing bush YM-HM-02-027 SK-7500 REV 00 www.stryker.com...

  • Page 89: Control Box And Battery

    HM-17-314 Control box HM-05-010 M6*50 steel bolt HM-08-05 M6 fibered nut HM-17-174 Control box mounting bracket HM-06-02 3.9 x 13 mm pan head self drilling screw HM-07-01 M6 metal standard washer (large) 1/4 washer www.stryker.com SK-7500 REV 00...

  • Page 90: Litter Fowler (Backrest) Assembly

    Red plastic CPR release handle HM-05-032 M8 x 20 mm countersunk bolt HM-06-30 M5 x 15 mm self drilling star bolt YM-15-05-0450-HZR1 X-Ray cassette track HM-08-06 M8 fibered nut HM-07-03 M8 iron washer HM-05-018 M8*90 half thread steel bolt SK-7500 REV 00 www.stryker.com...
  • Page 91 Ø5.5 x 19mm torque screw HM-05-005 Ø10 x 35 mm hex head bolt 4 YM-HM-02-88 Ø10 mm plastic bushing HM-07-04 M10 iron washer HM-08-07 M10 fiber hex nut HM-06-89 M10 x 55 mm carriage bolt YM-FUTURELBUST-001- Litter frame weldment www.stryker.com SK-7500 REV 00...

  • Page 92: Litter Seat Assembly

    Litter seat assembly Quantity Item Number Name HM-02-120 Plastic seat cover YM-FUTURELBUST-001- Litter frame weldment SK-7500 REV 00 www.stryker.com...

  • Page 93: Litter Gatch (Legrest) Assembly

    HM-07-04 M10 iron washer HM-02-283 2 mm plastic washer (10 mm plastic washer) mould NO 34 HM-06-89 M10 x 55 mm carriage bolt YM-HM-02-88 Ø10 mm plastic bushing HM-05-005 M10 x 35 mm hex head bolt www.stryker.com SK-7500 REV 00...
  • Page 94 Number Name HM-06-88 M8 x 47 mm carriage bolt HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-06-66 M6 x 15 mm button head screw YM-HM-02-55 Ø9 x 12.4 mm plastic screw YM-FUTURELBUST-001- Litter frame weldment SK-7500 REV 00 www.stryker.com...

  • Page 95: Fowler (Backrest) Actuator

    Fowler (backrest) actuator Quantity Item Number Name Ø10 rue clip HM-11-31 Ø14xØ10x65 mm actuator HM-12-FTR010 connection pin 4000 N LA40 QR 215 mm HM-17-303 actuator Actuator pin fixing bush YM-HM-02-027 www.stryker.com SK-7500 REV 00...

  • Page 96: Gatch (Legrest) Actuator

    Ø10 rue clip HM-11-31 Ø10.6xØ18x14.1 mm YM-HM-02-287 plastic bush Ø10.6xØ18x5 mm plastic YM-HM-02-70 washer Actuator calf pin 10x96.5 HM-12-FTR009 6000 N LA40 100 mm HM-17-305 stroke actuator Ø14xØ10x65 mm actuator HM-12-FTR010 connection pin Actuator pin fixing bush YM-HM-02-027 SK-7500 REV 00 www.stryker.com...

  • Page 97: Siderail Head End Assembly

    Siderail head end assembly Quantity Item Number Name YM-02-144-MN1 SV2 right foot siderail assembly HM-12-145 Ø10x305 mm siderail pin HM-02-283 Ø10x2 mm plastic washer HM-11-19 Ø10 hook ring HM-12-005 10x123.5 mm siderail pin YM-HM-02-028 Side board lock plastic- long YM-HM-02-029...

  • Page 98: Siderail Foot End Assembly

    Siderail foot end assembly Quantity Item Number Name YM-02-142-MN1 SV2 left siderail for foot HM-11-19 Ø10 hook ring HM-02-283 Ø10x2 mm plastic washer YM-HM-02-029 Side board lock plastic- short HM-12-005 10x123,5 mm siderail pin YM-HM-02-028 Side board lock plastic- long HM-12-145 Ø10x305 mm siderail pin...

  • Page 99: Siderail Assembly

    12-144 10 x 128 mm HM-12-144 siderail pin 8 mm snap ring HM-11-04 Future side rail shock HM-18-27 absorber 640015004 12-146 8 x 31 mm side rail HM-12-146 Q8 capped snap ring HM-11-18 (DT/6671/43A) Siderail plastic main YM-HM-02-369 mechanism housing www.stryker.com SK-7500 REV 00...

  • Page 100: Siderail Release Latch Assembly

    Ø5 x 98 mm siderail pin HM-12–147 with snap ring slides HM-06–14 Ø3.5 x 13 mm Star screw Hammer spring HM-16–51 Siderail mechanism plastic HM-02-370 cover HM-02-374 Siderail release handle HM04-FTR007 Siderail release hammer Siderail mechanism plastic HM-02-369 shell SK-7500 REV 00 www.stryker.com...

  • Page 101: Headboard And Footboard Assembly

    Ø18 x 4 mm head pipe HM-12-150 Head or footboard YM-20-013 polypropylene Headboard laminate Number Dark blue HM-20-871 Dark wood HM-20-763 Light wood HM-20-753 Wood HM-20-758 Footboard laminate Number Dark blue HM-20-870 Dark wood HM-20-763 Light wood HM-20-753 Wood HM-20-758 www.stryker.com SK-7500 REV 00...

  • Page 102: Emc Information

    EMC information Guidance and Manufacturer’s Declaration - Electromagnetic Emissions SV2 is intended for use in an electromagnetic environment specified below. The customer or the user of SV2 should assure that it is used in such an environment. Compliance Electromagnetic Environment...
  • Page 103 Guidance and Manufacturer’s Declaration - Electromagnetic Immunity SV2 is suited for use in the electromagnetic environment specified below. The customer or the user of SV2 should assure that it is used in such an environment.
  • Page 104 To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which SV2 is used exceeds the applicable RF compliance level above, SV2 should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating SV2.
  • Page 105 EMC information (Continued) Recommended separation distances between portable and mobile RF communications equipment and SV2 0.38 0.38 0.73 For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.

  • Page 106: Warranty

    Warranty Warranty may vary by country. Contact your local Stryker Medical representative for additional information. SK-7500 REV 00 www.stryker.com...

  • Page 107: Recycling Passports

    Recycling passports Assembly part number: HM-17-164 (Reference only) Recycling/Material Code Important Item HM-17-164 Power cable www.stryker.com SK-7500 REV 00...
  • Page 108 Recycling passports Assembly part number: HM-17-314 (Reference only) Recycling/Material Code Important Quantity Item HM-17-314 Control box SK-7500 REV 00 www.stryker.com...
  • Page 109 Recycling passports Assembly part number: HM-17-16 (Reference only) Recycling/Material Code Important Quantity Item Battery HM-17-16 www.stryker.com SK-7500 REV 00...
  • Page 110 Recycling passports Assembly part number: HM-17-156 (Reference only) Recycling/Material Code Important Quantity Item Multi-junction box HM-17-156 SK-7500 REV 00 www.stryker.com...
  • Page 111 Recycling passports Assembly part number: HM-17-310 / HM-17-311 (Reference only) Recycling/Material Code Important Quantity Item HM-17-310 / HM-17-311 Siderail control panel (right / left) www.stryker.com SK-7500 REV 00...
  • Page 112 Recycling passports Assembly part number: HM-17-313 (Reference only) Recycling/Material Code Important Quantity Item Nurse control pendant HM-17-313 SK-7500 REV 00 www.stryker.com...
  • Page 113 Recycling passports Assembly part number: HM-17-312 (Reference only) Recycling/Material Code Important Quantity Item Patient control pendant HM-17-312 www.stryker.com SK-7500 REV 00...
  • Page 114 Recycling passports Assembly part number: HM-17-304 (Reference only) Recycling/Material Code Important Quantity Item HM-17-304 Hi-lo actuator HM-17-304 Hi-lo actuator SK-7500 REV 00 www.stryker.com...
  • Page 115 Recycling passports Assembly part number: HM-17-303 (Reference only) Recycling/Material Code Important Quantity Item Fowler / backrest actuator HM-17-303 www.stryker.com SK-7500 REV 00...
  • Page 116 Recycling passports Assembly part number: HM-17-305 (Reference only) Recycling/Material Code Important Quantity Item Leg rest actuator HM-17-305 SK-7500 REV 00 www.stryker.com...
  • Page 117 Stryker Medical Kayseri Serbest Bölge Şubesi 2. Cad. No:17 38070 Kayseri, Turkey MADE IN TURKEY Stryker Medical 3800 E. Centre Avenue Portage, MI 49002 2017/08 www.stryker.com SK-7500 REV 00...

This manual is also suitable for:

7500

Table of Contents

Save PDF