Related Manuals for THUNDER TIGER Raptor SE 50 Size 3D Heli
Summary of Contents for THUNDER TIGER Raptor SE 50 Size 3D Heli
- Page 15 MMV 1050 ZZO Angular Bearing (d5xD10x4) Red Side In Black Side Out Warning: Please note the assembling direction of the angular bearing. If they are not assembled properly as illustrated, they will easily fail and result in unexpected danger.
- Page 27 30mm 100mm use inner hole for beginner to 3D use outer hole for extreme 3D 55mm 10-12mm for beginnners collective control 55mm for intermediates and 3D +10˚- –10˚ lengths measured from ball link center 51mm ball link center 54mm 10mm make a 15˚...
- Page 31 Dear Raptor Customers: The stock wood blades should be operated with a main rotorspeed of no more than 1700 RPM. For 3D aerobatics or rotor speed more than 1700RPM, it is recommended to use carbon main rotor blades. The above drawing illustrate how to rem ove the plastic blade grips and then carefully slice away some of the covering material, and add the "thin"...
- Page 36 PV0639 Tail Rotor Angular Brg...
- Page 42 PV0639 Tail Rotor Angular Brg. HMV1050ZZO Bearing, d5xD10x4...
- Page 44 α NO. 8030 ZERO GOVERNOR NO. 8070 HEADING LOCK GYRO, NO. 8071 TG7000, DS0606 NO. 8126 DIGITAL SERVO, DS1213 NO. 8130 DIGITAL RUDDER SERVO, TG7000 DS0606 PV0114 METAL WASHOUT BASE...
- Page 45 PV0499 SUS TAIL HUB 2156 2.4AH GLOW STR-L,110V 2P 2748 12V 7.2AH Sealed Lead Acid 2157 2.4AH GLOW STR-L,230V 2P 2158 2.4AH GLOW STR-L,230V 3P...
Need help?
Do you have a question about the Raptor SE 50 Size 3D Heli and is the answer not in the manual?
Questions and answers