Bluetooth Connection - Sharkk Boombox Manual

Bluetooth Connection
1. Long press Power button to turn on the system. The power indicator
( Green ) lights up.
2. Press Play/ Pause Button for 3 seconds, along with voice prompt.
When the indicator light shows fast blue and red flash alternatively,
the system enters pairing mode. ( Notes: Pairing mode is cancelled
after 3 minutes, along with a " Beep " sound. If you want to enter into
pairing mode again, start over from step 2. )
3. Perform the pairing procedure on the Bluetooth device to detect the
system.
A list of detected devices appears on the display of the Bluetooth
stereo audio source device.
This system is displayed as " Hi‐FiD Boombox "
If " Hi‐FiD Boombox " is not displayed, repeat from step 2. (
When pairing, be sure to keep both the Bluetooth devices within 1 m
range of each other. )
4. Select "Hi‐FiD Boombox " shown in the display of the Bluetooth
device.
5. If Passcode * input is required on the display of the Bluetooth device,
input " 0000 ". (
code ", " PIN number " or " Password ". )
Notes: Passcode may be called " Passkey ", " PIN
Notes: