Led Colours - NEC AP400 Installation Manual

Lower LED – Red/Green
This LED is used to indicate the start-up and network status.
LED Status (lower LED,
Red/Green)
RED Steady on
RED flashing
Green flashing
Off
5.2

LED Colours

The colour of the top LED might be different depending on the operational mode. The
following operational modes are distinguished:
Normal (single band) mode
In the normal single band mode, the top LED will be Yellow.
Dual Band Mode
In Dual Band mode, the LED colour shows the operational frequency:
Green
Red
AP400 – All Types Installation Manual
Meaning
Power but FPGA starting up
Trying to connect to the network
Network status display and showing network activity
AP400 operational
Table 2. Lower LED status on the AP400.
: Europe/International
: North America / USA
Page 31 of 34 © NEC Nederland B.V. 2011