Sharp PRO-60X5FD Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. LCD TV
  5. Elite PRO-60X5FD
  6. Service manual

Sharp PRO-60X5FD Service Manual

Hide thumbs Also See for PRO-60X5FD:
Table of Contents

Advertisement

Quick Links

TopPage
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
SAFETY PRECAUTION
PRECAUTION........................................ . ............i
MAJOR SERVICE PARTS ..................... . ..........iv
CHAPTER 1. SPECIFICATIONS
[1]
SPECIFICATIONS ................................. . ....... 1-1
CHAPTER 2. OPERATION MANUAL
[1]
Parts Name ............................................ . ....... 2-1
[2]
OPERATION MANUAL .......................... . ....... 2-3
[1]
DIMENSIONS (PRO-60X5FD)............... . ....... 3-1
[2]
DIMENSIONS (PRO-70X5FD)............... . ....... 3-2
[1]
(PRO-60X5FD)....................................... . ....... 4-1
[2]
(PRO-70X5FD)....................................... . ....... 4-6
[3]
sheet ...................................................... . ..... 4-11
[4]
Precautions for assembly....................... . ..... 4-12
[5]
Ass'y....................................................... . ..... 4-14
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.

SERVICE MANUAL

LCD COLOR TELEVISION
MODELS
CONTENTS
CHAPTER 5. ADJUSTMENT
[1]
ADJUSTMENT PROCEDURE ......................5-1
[2]
PROCEDURE..............................................5-16
[1]
cabinet ...........................................................6-1
[2]
error (Power LED used).................................6-1
[3]
TROUBLESHOOTING TABLE ......................6-5
[1]
MAJOR IC INFORMATIONS .........................7-1
[1]
(PRO-60X5FD) ..............................................8-1
[2]
(PRO-70X5FD) ..............................................8-2
[3]
SYSTEM BLOCK DIAGRAM .........................8-3
PRO-60/70X5FD
No. S81S7PR60X5FD
PRO-60X5FD
PRO-70X5FD
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO-60X5FD and is the answer not in the manual?

Questions and answers

Related Manuals for Sharp PRO-60X5FD

Summary of Contents for Sharp PRO-60X5FD

  • Page 1: Table Of Contents

    OPERATION MANUAL ........2-3 DIAGRAM OVERALL WIRING DIAGRAM CHAPTER 3. DIMENSIONS (PRO-60X5FD) ..........8-1 DIMENSIONS (PRO-60X5FD)....... 3-1 OVERALL WIRING DIAGRAM DIMENSIONS (PRO-70X5FD)....... 3-2 (PRO-70X5FD) ..........8-2 SYSTEM BLOCK DIAGRAM ......8-3 CHAPTER 4. REMOVING OF MAJOR PARTS...

  • Page 2: Important Service Safety

    PRO-60/70X5FD PRO60X5FD SAFETY PRECAUTION Service Manual IMPORTANT SERVICE SAFETY PRECAUTION Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow: WARNING • Using two clip leads, connect a 1.5k ohm, 10 watt resistor paral- leled by a 0.15µF capacitor in series with all exposed metal cabinet 1.

  • Page 3: Precaution

    PRO-60/70X5FD PRECAUTIONS A PRENDRE LORS DE LA REPARATION Ne peut effectuer la réparation qu' un technicien spécialisé qui s'est parfaitement accoutumé à toute vérification de sécurité et aux conseils suivants. AVERTISSEMENT • A l'aide de deux fils à pinces, brancher une résistance de 1.5 kΩ 10 watts en parallèle avec un condensateur de 0.15µF en série N'entreprendre aucune modification de tout circuit.

  • Page 4: Precautions For Using Lead-Free Solder

    PRO-60/70X5FD PRECAUTIONS FOR USING LEAD-FREE SOLDER Employing lead-free solder • “PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder. Example: Indicates lead-free solder of tin, silver and copper.

  • Page 5: Outline

    NOTE: *1 Replace MAIN PWB Units (DKEYMF733FM**) in case of IC8401, IC3303 or IC8455 failure. OTHER Unit Ref No. Parts No. Description R1LK600D3GW60Z 60" LCD Panel Module Unit (LK600D3GW60Z) (PRO-60X5FD) R1LK695D3GW10Z 70" LCD Panel Module Unit (LK695D3GW10Z) (PRO-70X5FD) IC For Exclusive Use Of The Service Ref No. Parts No.

  • Page 6: Specifications

    The dimensional drawings are shown on the inside back cover. As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.

  • Page 7: Parts Name

    PRO-60/70X5FD CHAPTER 2. PRO60X5FD OPERATION MANUAL Service Manual [1] Parts Name TV (Front/Side) POWER button MENU button INPUT button Channel buttons OPC sensor *2 Volume Remote control sensor buttons (VOL Power LED 3D infrared emitter *3 *1 Button operations. *2 OPC: Optical Picture Control *3 This panel emits the infrared signal towards the 3D Glasses you wear when you view 3D images.
  • Page 8 PRO-60/70X5FD Remote Control Unit POWER: Switch the TV power on or enter standby. TV, STB, BD DVD, AUDIO: Switches the remote control for TV, STB, BD, DVD and AUDIO operation. * To enter the code registration mode, you need to press an appropriate button (STB, BD DVD or AUDIO) and DISPLAY at the same time.

  • Page 9: Quick Reference

    PRO-60/70X5FD [2] OPERATION MANUAL QUICK REFERENCE Attaching the Stand Before attaching (or detaching) the stand, unplug the AC cord. Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. Attach the stand in the correct direction.

  • Page 10: Chapter 3. Dimensions

    PRO-60/70X5FD CHAPTER 3. PRO60X5FD DIMENSIONS Service Manual [1] DIMENSIONS (PRO-60X5FD) Unit: inch (mm) (44.3) (59) (1400) (77) (1329.12) (137) (536) (333) (400) 10° (244) 5 (127) (237) AN-52AG4 Active area Thinnest part 3 – 1...

  • Page 11: Dimensions (Pro-70X5Fd)

    PRO-60/70X5FD [2] DIMENSIONS (PRO-70X5FD) Unit: inch (mm) (50) (69) (1624) (77) (1538.88) (137) (333) (536) (400) 10° (215) (136) (264) AN-52AG4 Active area Thinnest part 3 – 2...

  • Page 12: Chapter 4. Removing Of Major Parts Removing Of Major Parts (Pro-60X5Fd)

    CHAPTER 4. PRO60X5FD REMOVING OF MAJOR PARTS Service Manual [1] REMOVING OF MAJOR PARTS (PRO-60X5FD) 1. Removing of Stand Unit and Rear Cabinet Ass’y. 1. Remove the 4 lock screws and detach the Stand Unit 2. Remove the 1 lock screw and detach the AC Cord Cover 3.

  • Page 13: Key Unit

    PRO-60/70X5FD 2. Removing of KEY Unit, Speaker (Woofer) and 60” LCD Panel Module Unit. 1. Remove the slide on 2 hooks and detach the 2 Bottom Covers 2. Disconnect the RC wire. 3. Detach the KEY Unit Ass’y 4. Disconnect the KM wire. 5.
  • Page 14 PRO-60/70X5FD 3. Removing of Connectors 1. Disconnect the following connectors from the MAIN Unit. (LW, PD, PL) 2. Disconnect the following connectors from the POWER Unit. (PD, LA) 3. Disconnect the following connectors from the LCD CONTROL Unit. (LB, LW, PL) 4.
  • Page 15 PRO-60/70X5FD 4. Removing of MAIN Unit, LCD CONTROL Unit, POWER Unit and LD DRIVE Unit. 1. Remove the 5 lock screws and detach the Shield (MAIN Unit) 2. Remove the 3 lock screws and detach the MAIN Unit and Terminal Angle (Bottom) 3.
  • Page 16 PRO-60/70X5FD 5. Removing of Speaker (L/R), 3D IR Emitter Unit, R/C OPC Unit, WiFi Unit and Decoration Frame (Top/Bottom/ L/R). 1. Remove the 7 lock screws , 4 hooks and detach the Bottom Body Ass’y . 2. Detach the Speaker (L) and Speaker (R) 3.

  • Page 17: Stand Unit

    PRO-60/70X5FD [2] REMOVING OF MAJOR PARTS (PRO-70X5FD) 1. Removing of Stand Unit and Rear Cabinet Ass’y. 1. Remove the 4 lock screws and detach the Stand Unit 2. Remove the 1 lock screw and detach the AC Cord Cover 3. Disconnect AC wire and detach the AC Cord 4.
  • Page 18 PRO-60/70X5FD 2. Removing of KEY Unit, Speaker (Woofer) and 70” LCD Panel Module Unit. 1. Remove the slide on 2 hooks and detach the 2 Bottom Covers 2. Disconnect the RC wire. 3. Detach the KEY Unit Ass’y 4. Disconnect the KM wire. 5.
  • Page 19 PRO-60/70X5FD 3. Removing of Connectors 1. Disconnect the following connectors from the MAIN Unit. (LW, PD, PL) 2. Disconnect the following connectors from the POWER Unit. (PD, LA) 3. Disconnect the following connectors from the LCD CONTROL Unit. (LB, LW, PL) 4.
  • Page 20 PRO-60/70X5FD 4. Removing of LCD CONTROL Unit, POWER Unit, MAIN Unit and LD DRIVE Unit. 1. Remove the 5 lock screws and detach the Shield (MAIN Unit) 2. Remove the 4 Connecting Cords , 6 lock screws and detach the LCD CONTROL Unit and 4 Ferrite Cores 3.
  • Page 21 PRO-60/70X5FD 5. Removing of Speaker (L/R), 3D IR Emitter Unit, R/C OPC Unit, WiFi Unit and Decoration Frame (Top/Bottom/ L/R). 1. Remove the 9 lock screws , 4 hooks and detach the Decoration Frame Ass’y (Bottom) 2. Detach the Speaker (L) and Speaker (R) 3.

  • Page 22: The Location Putting On The Heat Measure Sheet

    PRO-60/70X5FD [3] The location putting on the heat measure sheet 1. MAIN PWB Unit PSPAZC741WJKZ 2. LCD Control Unit (PRO-60X5FD) PSPAZC782WJKZ (PRO-70X5FD) PSPAZC782WJKZ 4 – 11...

  • Page 23: Precautions For Assembly

    PRO-60/70X5FD [4] Precautions for assembly 1. Points to be checked and precautions when servicing the unit Mount the main PWB Ass’y on the backlight chassis and check that the EMI-prevention parts are not peeled and twisted from the access holes. (The EMI-prevention parts, conductive nonwoven fabric gaskets, must be seen from the access holes.) [Countermeasure] Attach the conductive nonwoven fabric gaskets on the shielded case on the main PWB.
  • Page 24 The following is a drawing mounting the main PWB Ass’y on the backlight chassis. (The parts indicated by -> are the access holes for confirmation.) (Main PWB Ass’y => State where the shielded case and RF terminal angle are mounted on the main PWB) (PRO-60X5FD) (PRO-70X5FD)

  • Page 25: The Way Of Detaching Rear Cabinet Ass'y

    PRO-60/70X5FD [5] The way of detaching Rear Cabinet Ass'y • Here are the way of detaching Rear Cabinet Ass’y. Please respond in following order. 1. Lay the TV set down on the desk or table with the glass side down, set the left hand between Decoration Frame and Rear Cabinet Ass’y on the bottom of right corner side.
  • Page 26 PRO-60/70X5FD 3. Push Rear Cabinet Ass’y toward the center of TV set with right hand. At the same time, open Rear Cabinet Ass’y in the back side with left hand and detach the hook. Figure for image Right Hand Left Hand 4.

  • Page 27: Adjustment Procedure

    1. After replacement of any PWB unit and/or IC for repair, please note the following. • When replacing the following units, make sure to prepare the new units loaded with updated software. MAIN Unit: DKEYMF733FM21: PRO-60X5FD DKEYMF733FM20: PRO-70X5FD • When replacing the LCD control PWB, perform the VCOM adjustment.
  • Page 28 PRO-60/70X5FD 2.2.3 How to upgrade the software 1. Unplug the AC cord. 2. Insert the USB Memory for version upgrade into the service socket. 3. Plug in the AC cord with power button pressed down. 4. After 5 seconds, unpress the power button. 5.
  • Page 29 PRO-60/70X5FD 2.3. Monitor microprocessor software version upgrade Create the USB memory for monitor microprocessor software version upgrade in the same manner as explained in the “Main software version upgrade”. Copy the file BSMK_X5FD_xxx.USB and BMELMxxx.SMB. (named temporarily) for monitor microprocessor software version upgrade to the USB memory.
  • Page 30 PRO-60/70X5FD 3. Entering and exiting the adjustment process mode 1) Before entering the adjustment process mode, the AV position RESET in the video adjustment menu. 2) While holding down the “VOL (–)” and “INPUT” keys at a time, plug in the AC cord of the main unit to turn on the power. The letter “<K>”...
  • Page 31 PRO-60/70X5FD 5. List of adjustment process mode menu The character string in brackets [ ] will appear as a page title in the adjustment process menu header. Page Line Item Description Remarks (adjustment detail, etc.) MAIN Version Main software version BOOT Version Monitor / Monitor BOOT Version Monitor and monitor boot software version...
  • Page 32 PRO-60/70X5FD Page Line Item Description Remarks (adjustment detail, etc.) ANALOG RGB ADJ Analog RGB picture level adjustment R A_GAIN G A_GAIN B A_GAIN R OFFSET G OFFSET B OFFSET VCOM ADJ VCOM adjustment value LEV1 Standard value 1 Adjustment gradation setting. LEV2 Standard value 2 LEV3...
  • Page 33 PRO-60/70X5FD Page Line Item Description Remarks (adjustment detail, etc.) MODE SELECT POS SELECT POS MIN POS MID1 POS MID2 POS MID3 POS MID4 POS MID5 POS MID6 POS MAX CD MIN CD MID1 CD MID2 CD MID3 CD MID4 CD MID5 CD MID6 CD MAX CALC...
  • Page 34 Writing setting values to EEPROM EEP RECOVER Reading setting values from EEPROM MODEL NAME PANEL SIZE SETTING FOR ADJ VERUP FLAG ENABLE SHARP RC ENABLE PANEL LIMIT PANEL RANGE LIMIT SHORT CHECK MODE SHORT CHECK CURRENT CURRENT SW TEST NETWORK UPDATE...
  • Page 35 PRO-60/70X5FD *1 Details of P1.12 (NORMAL STANDBY CAUSE) When TV set is powered off due to normal use or product specification, the last cause will be recorded. The code, character string and description for the standby cause are below. If you power off by remote, the cause will not be recorded. Code Character string Description...

  • Page 36: Special Features

    PRO-60/70X5FD 6. Special features * STANDBY CAUSE (Page 1/29) Display of a cause (code) of the last standby The cause of the last standby is recorded in EEPROM whenever possible. Checking this code will be useful in finding a problem when you repair the troubled set. * EEP SAVE (Page 29/29) Storage of EEP adjustment value * EEP RECOVER (Page 29/29)
  • Page 37 PRO-60/70X5FD 8.2. Image adjustment 8.2.1 Device check Before adjustment, check that the adjustment jig and signal source are set for Sharp LCD US. Signal generator level adjustment check (Adjust to the standard value level.) • Composite signal: 0.714Vp-p ± 0.02Vp-p (Pedestal to white) •...
  • Page 38 PRO-60/70X5FD 8.2.5 Component 33K signal adjustment Adjustment point Adjustment conditions Adjustment procedure • Send the 100% color bar signal to the component input. Setting 1080i signal Color saturation: 100% 1080i 100% color bar 100% white 0% black Automatic adjustment Point the cursor to [ COMP33K ADJ(INPUT1)] and press the [Enter] key. execution The adjustment is complete when [ COMP33K ADJ(INPUT1) OK] is displayed.
  • Page 39 PRO-60/70X5FD 9. White balance adjustment 9.1. White balance adjustment (For details about the adjustment procedure, refer to “Kameyama Model Integrated Monitor WB Adjustment Specification V1.92”.) Adjustment point Adjustment conditions Adjustment procedure Setting 1) Set the unit to the following conditions. AV MODE: [DYNAMIC] Backlight: +16 Active Backlight: OFF...
  • Page 40 Adjustment conditions Adjustment procedure 1G3Y**** [Adjustment value] MG3G**** * According to the “Standard settings” submitted by the Technical Department MG3B*** [PRO-60X5FD] X5FD model teaching set MG3R**** MG3Y**** [Adjustment standard value] Measuring instrument: [Minolta CA-210] Technical measuring instrument Point 2 Level...

  • Page 41: Software Version

    PRO-60/70X5FD 11. Factory setting After completing the factory setting, pull out the AC cord to complete the setting. CAUTION: Do not turn on the power after completing the factory setting. If the power is turned on, configure the factory setting again. Adjustment point Adjustment conditions Adjustment procedure...

  • Page 42: Public Mode Setting Procedure

    PRO-60/70X5FD [2] PUBLIC MODE SETTING PROCEDURE 1. How to start Public Mode • There are the following two ways to get the public mode setup screen displayed. In the adjustment process mode, turn on “PUBLIC MODE”. Also press the “CH ( )”...
  • Page 43 PRO-60/70X5FD 4. Public Mode Menu The guidance is not displayed on screen. Setup procedure • To move the cursor up and down, use the “cursor UP/DOWN” key (remote controller) and “CH ( )” key (remote controller and set). • To change the settings, use the “cursor RIGHT/LEFT” key (remote controller) and “VOL (+)/(–)” key (remote controller and set). •...
  • Page 44 PRO-60/70X5FD [How to use USB clone] This is the function that copying the one TV's user setting to other TVs or copying previous user setting to itself.(Only same series.) 1. Insert the USB memory to TV. 2. Insert AC code of TV with pushing the “INPUT” and “Vol+” keys which are on the tact key. 3.
  • Page 45 PRO-60/70X5FD 10.The following guide is dispalyed.Then select the “USB→TV [Start]”. 11.Follow guide is displayed when it is finished , then select "Reset" . TV will restart. 12.Comfirm the user setting is copied. 5 – 19...
  • Page 46 PRO-60/70X5FD 5. On Setting Items * “EZ-SETUP” discussed below indicates “EZ-SETUP after the first power-on”. 1) POWER ON FIXED Selection Selection between “Variable” and “Fixed” (loop provided) Default – (Variable) Explanation In “Fixed” setting, the power-off by the power key of the unit is invalidated and the image is kept being received. The power can be turned off by stopping the power supply from AC.
  • Page 47 PRO-60/70X5FD 6) PANEL BUTTON Selection Selection between “Respond” and “No respond” (loop provided) Default Respond Explanation All the operations by keys (except the power key) of the unit can be invalidated. Limit in Setting • Adjustment process, inspection mode and hotel menu mode can be started irrespective of setting. Exception •...
  • Page 48 PRO-60/70X5FD 10)INPUT MODE FIXED Selection Selection between “Variable”, “Fixed”, “ACON (AC CTRL)” and “AC/RCON (AC/RC CTRL)” (loop provided) Default – (Variable) • At the “Fixed” setting, the TV set gets started with the settings of “Input mode start”, and then any other channels and inputs Explanation are not accepted.
  • Page 49 PRO-60/70X5FD 15)PUBLIC MODE (ON/OFF) Selection Selection between “ON” and “OFF” (loop provided) Default Explanation In case of “ON”, public mode settings are effected. Limit in Setting None Exception None Remarks The public-mode settings are operable only when this item is set at ON. 5 –...

  • Page 50: Chapter 6. Troubleshooting Table

    PRO-60/70X5FD CHAPTER 6. PRO60X5FD TROUBLESHOOTING TABLE Service Manual [1] Failure diagnosis by LED in front of cabinet START Is the Center Icon flashing? Check "[2] LED flashing specification at the time of an error (Center icon LED used)". Is the Center Icon lighting Check Power-Unit and AC-cable.
  • Page 51 PRO-60/70X5FD Table 1. Concrete flashing pattern (Error standby) Outline display Detail display Item Cause Slow flashing Fast flashing Slow flashing Fast flashing Inverter/Lamp system Flashes once None Flashes once Flashes once Lamp error failure Power PWB failure Flashes twice None Flashes twice Flashes once Power supply error 1 (*2) AC_DET error...
  • Page 52 PRO-60/70X5FD LED flashing timing chart at the time of an error 100ms 400ms 1.6sec 1) Slow flashing Note Error type Power LED operation Pins are monitor microcomputer pins. Inverter/Lamp failure H: On Refer to “Inverter/Lamp failure details”. Flashes slowly once Flashes slowly and fast by pressing the [MENU] key on the remote control (refer to 2 below).
  • Page 53 PRO-60/70X5FD 4) Communication failure details (Flashes slowly 3 times and flashes fast) Note Basically, debug print logs are analyzed or commu- Error type Power LED operation nication logs are analyzed by a bus monitor. Initial communica- H: On Initial communication from the main CPU is not tion reception failure received.

  • Page 54: Troubleshooting Table

    PRO-60/70X5FD [3] TROUBLESHOOTING TABLE • LED Backlight does not turn on. If it is not an error of power supply/LED driver, It is start-up in the lamp error disregard mode. Do you start? When main unit is replaced, does it start normally? Replace main unit.
  • Page 55 PRO-60/70X5FD Trouble Shooting Panel Module When C-S FPC (4pieces) is replaced, does screen display normally? Replace C-S FPC (4pieces). When C-PWB is replaced, does screen display normally? Replace C-PWB. (Adjust “VCOM ADJ” after replace C-PWB) Replace Panel HIRAKI. (Adjust “VCOM ADJ” after replace Panel HIRAKI) 6 –...
  • Page 56 PRO-60/70X5FD • Picture does not display. No video (1) COMPOSITE: No external input video [INPUT-7] COMPOSITE: No external input video [INPUT-8] Is INPUT-7 selected on the input select menu screen? Is INPUT-8 selected on the input select menu screen? Select INPUT-7 on the input select menu Select INPUT-8 on the input select menu screen for the right input signal.
  • Page 57 PRO-60/70X5FD No video (2) COMPONENT: No external input video [INPUT-6] Is INPUT-6 selected on the input select menu screen? Is the INPUT-SELECT for the input signal? Select INPUT-6 on the input select menu screen for the right input signal. Does the COMP1_PLUG detection function? Check the line between pin (17) of input terminal (J510) and pin (L32) of IC3303 (CPU).
  • Page 58 PRO-60/70X5FD No video (3) No video at UHF/VHF broadcast signal reception No video at digital broadcast signal reception Is the specified TV signal selected on the input select menu screen? Is there the analog video signal output (CVBS) at pin (9) of tuner Are there the IF signal outputs (D_IF+/-) at the pins (11) and (10) of tuner (TU1105)? (TU1105)?
  • Page 59 PRO-60/70X5FD No video (4) PC: No external input video [INPUT-9] Is INPUT-9 selected on the input select menu screen? Select INPUT-9 on the input select menu screen for the right input signal. Is IC1504 (HDMI switch) accessed by I2C, with PC connected, to read the VGA_SCL/SDA data? Check the DDC line and its peripheral circuits.
  • Page 60 PRO-60/70X5FD <HDMI input> No video (5)-1 HDMI: No external input video [INPUT-1] Is INPUT-1 selected on the input select menu screen? Select INPUT-1 on the input select menu screen for the right input signal. Does the HOT PLUG detection function? Check the line between the input terminals of SC1503 and IC1504.
  • Page 61 PRO-60/70X5FD <HDMI input> No video (5)-2 HDMI: No external input video [INPUT-2] Is INPUT-2 selected on the input select menu screen? Select INPUT-2 on the input select menu screen for the right input signal. Does the HOT PLUG detection function? Check the line between the input terminals of SC1502 and IC1504.
  • Page 62 PRO-60/70X5FD <HDMI input> No video (5)-3 HDMI: No external input video [INPUT-3] Is INPUT-3 selected on the input select menu screen? Select INPUT-3 on the input select menu screen for the right input signal. Does the HOT PLUG detection function? Check the line between the input terminals of SC1501 and IC1504.
  • Page 63 PRO-60/70X5FD <HDMI input> No video (5)-4 HDMI: No external input video [INPUT-4] Is INPUT-4 selected on the input select menu screen? Select INPUT-4 on the input select menu screen for the right input signal. Does the HOT PLUG detection function? Check the line between the input terminals of SC1505 and IC1504.
  • Page 64 PRO-60/70X5FD <HDMI input> No video (5)-5 HDMI: No external input video [INPUT-5] Is INPUT-5 selected on the input select menu screen? Select INPUT-5 on the input select menu screen for the right input signal. Does the HOT PLUG detection function? Check the line between the input terminals of SC1504 and IC1504.
  • Page 65 PRO-60/70X5FD • Does not sound. No audio (1) INPUT-7 No audio. INPUT-8 No audio. INPUT-6 No audio. Is INPUT-7 selected on the input select Is INPUT-8 selected on the input select Is INPUT-6 selected on the input select menu screen? menu screen? menu screen? Refer to “: No external input...
  • Page 66 PRO-60/70X5FD No audio (2) [PC analog audio input] INPUT-9 No audio. [HDMI analog audio input] INPUT-2 No audio. Is INPUT-9 selected on the input select menu screen? Is INPUT-2 selected on the input select menu screen? Refer to “: No external input video [INPUT-9]”. Refer to “: No external input video [INPUT-2]”.
  • Page 67 PRO-60/70X5FD No audio (3) No audio at UHF/VHF broadcast signal reception. No audio at digital broadcast signal reception. Is TV selected on the input select menu screen? Is TV selected on the input select menu screen? Refer to “No video at UHF/VHF broadcast signal Refer to “No video at digital broadcast signal reception”.
  • Page 68 PRO-60/70X5FD No audio (4) INPUT-1 No audio (HDMI connected) INPUT-2 No audio (HDMI connected) INPUT-3 No audio (HDMI connected) INPUT-4 No audio (HDMI connected) INPUT-5 No audio (HDMI connected) [INPUT-1 input] Is INPUT-1 selected on the input select menu screen? [INPUT-2 input] Is INPUT-2 selected on the input select menu screen? [INPUT-3 input]...
  • Page 69 PRO-60/70X5FD No audio signal at Digital Audio Output terminal (Analog sound heard) No INPUT-1/2/3/4/5 (HDMI) audio. No audio at digital broadcast signal reception. If no video appears, refer to “No external input video (HDMI) If no video appears, refer to “No video at digital broadcast signal [INPUT-1/2/3/4/5]”.
  • Page 70 PRO-60/70X5FD No monitor audio output Is the audio output from the monitor set at “VARIABLE” or “FIXED” on the menu screen? Check IC3303 (CPU) and its peripheral circuits. Are there the audio signal outputs at pins (AJ31) (HP_MON_L) and (AJ32) (HP_MON_R) of IC3303 (CPU)? Check IC3303 (CPU) and its peripheral circuits.

  • Page 71: Chapter 7. Major Ic Informations

    PRO-60/70X5FD CHAPTER 7. PRO60X5FD MAJOR IC INFORMATIONS Service Manual [1] MAJOR IC INFORMATIONS 1. MAJOR IC INFORMATIONS 1.1. IC1504 (VHiSii9387+-1Q) This IC is 5 input and 1 output HDMI port processor. The TMDS cores run at 2.25Gbps. (Supports video resolutions up to 1080p, 60Hz, 12bit.) The adaptive equalizer provides long cable support.
  • Page 72 PRO-60/70X5FD 1.12. IC9505 (VHiPD720114-1Q) This IC is a USB hub controller. It has one upstream port and four downstream ports, 7 – 2...

  • Page 73: Chapter 8. Overall Wiring/System Block Diagram Overall Wiring Diagram (Pro-60X5Fd)

    PRO-60/70X5FD PRO60X5FD CHAPTER 8. OVERALL WIRING/SYSTEM BLOCK DIAGRAM Service Manual [1] OVERALL WIRING DIAGRAM (PRO-60X5FD) Full-HD Panel (1920×1080) 60”: R1LK600D3GW60Z [LA] LED DRIVE Unit [LA] [PD] RUNTKA841WJZZ POWER Unit RDENCA418WJQZ QCNWN2762TPZZ QCNWN2763TPZZ QCNWN2764TPZZ QCNWN2765TPZZ [SB] [PD] [AC] [SP] [LW] [LB]...

  • Page 74: Overall Wiring Diagram (Pro-70X5Fd)

    PRO-60/70X5FD [2] OVERALL WIRING DIAGRAM (PRO-70X5FD) Full-HD Panel (1920×1080) 70": R1LK695D3GW10Z WOOFER: RSP-ZA513WJQZ LED DRIVE Unit RUNTKA838WJZZ [LA] [PD] POWER Unit RDENCA446WJQZ [LA] [SB] [PD] [SP] [AC] [LW] MAIN Unit DKEYMF733FM20 [PL] LCD CONTROL Unit [RC] [LB] RUNTK4908TPZF [PL] TUNER [LB] [LW] [UB]...

  • Page 75: System Block Diagram

    PRO-60/70X5FD [3] SYSTEM BLOCK DIAGRAM CVBS2_IN CVBS INPUT CVBS2_IN_L/R T-CON MAIN CVBS1_IN CVBS INPUT CVBS1_IN_L/R I2C_READY PNL_EN N_PNL_EN COMP1_IN_L/R INPUT PNL_WP COMP1_Y/Pb/Pr Component OFL1_FRCRST 24.576MHz I2C_0(400KHz) [SP] X2701 Xtal I2C_0(400KHz) +13V SPEAKER P2701 IC2703 AMP_DATA_LR EXT-SP SP AMP(2CH) +3.3V +3.3V YDA164 IC8455 +1.8V...
  • Page 76 PRO-60/70X5FD — M E M O — 8 – 4...

  • Page 77: Parts Guide

    PRO-70X5FD MODELS CONTENTS PRINTED WIRING BOARD CABINET PARTS (PRO-70X5FD) ASSEMBLIES (PRO-60X5FD) SUPPLIED ACCESSORIES/ PRINTED WIRING BOARD PACKING PARTS (PRO-60X5FD) ASSEMBLIES (PRO-70X5FD) SUPPLIED ACCESSORIES/ LCD PANEL MODULE UNIT PACKING PARTS (PRO-70X5FD) CABINET PARTS (PRO-60X5FD) SERVICE JIGS (USE FOR SERVICING) Parts marked with "...
  • Page 78 WiFi Unit RUNTKA810WJQZ 3D IR EMITTER Unit RUNTKA819WJQZ POWER Unit RDENCA446WJQZ LED DRIVE Unit RUNTKA838WJZZ LCD CONTROL Unit RUNTK4908TPZF [3] LCD PANEL MODULE UNIT 60" LCD Panel Module Unit (LK600D3GW60Z) (PRO-60X5FD) R1LK600D3GW60Z 70" LCD Panel Module Unit (LK695D3GW10Z) (PRO-70X5FD) R1LK695D3GW10Z...
  • Page 79 PRO-60/70X5FD [4] CABINET PARTS (PRO-60X5FD) R/C OPC Unit WiFi KEY Unit Unit 3D IR EMITTER Unit CONTROL Unit LED Drive Unit 60" LCD Panel Module Unit MAIN Unit POWER Unit...
  • Page 80 PRO-60/70X5FD PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [4] CABINET PARTS (PRO-60X5FD) Rear Cabinet Ass'y CCABBB990WJ31 Rear Cabinet Not available Terminal Indicator (Side) HiNDPE268WJSA Terminal Indicator (Bottom) HiNDPE365WJSA Terminal Indicator (Back) HiNDPE378WJSA Himeron, x3 PSPAHC171WJZZ Himeron PSPAHC497WJZZ Bottom Body Ass'y...
  • Page 81 PRO-60/70X5FD [5] CABINET PARTS (PRO-70X5FD) R/C OPC Unit WiFi Unit 3D IR EMITTER Unit KEY Unit 33-2 33-1 33-2 33-1 CONTROL Unit 37 56 LED DRIVE Unit 70" LCD Panel Module Unit MAIN Unit POWER Unit...
  • Page 82 PRO-60/70X5FD PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [5] CABINET PARTS (PRO-70X5FD) Rear Cabinet Ass'y CCABBB991WJ31 Rear Cabinet Not available Terminal Indicator (Side) HiNDPE268WJSA Terminal Indicator (Bottom) HiNDPE365WJSA Terminal Indicator (Back) HiNDPE378WJSA Himeron PSPAHC168WJZZ Himeron, x2 PSPAHC171WJZZ Himeron PSPAHC504WJZZ Himeron, x2 PSPAHC505WJZZ PSPAHC502WJZZ...
  • Page 83 PRO-60/70X5FD [6] SUPPLIED ACCESSORIES/PACKING PARTS (PRO-60X5FD) 3D Glasses Accessories 3D Glasses Cable tie USB cable*2 Stand support Ass'y (x2) Stand Base Ass'y (x1) ( 2) (×2) ( 1) Remote control (x1) Nose pad *1 Glasses case (small ×2, large ×2) Brochure (E) (×2)
  • Page 84 PRO-60/70X5FD PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [6] SUPPLIED ACCESSORIES/PACKING PARTS (PRO-60X5FD) Stand Support Ass'y, x2 CANGKD276WJ01 Stand Base Ass'y CDAi-A778WJ31 Stand Screw Ass'y CSAKKA011WJ01 3D Glasses Accessories, x2 AN-3DG20-EL Remote Control RRMCGA937WJSA Cable Clamp LHLDWA303WJKA Brochure (E)
  • Page 85 PRO-60/70X5FD [7] SUPPLIED ACCESSORIES/PACKING PARTS (PRO-70X5FD) 3D Glasses Accessories 3D Glasses USB cable*2 Cable tie Stand support Ass'y (x2) Stand Base Ass'y (x1) ( 2) (×2) ( 1) Remote control (x1) Nose pad *1 Glasses case (small ×2, large ×2) Brochure (E) (×2) Brochure (F)
  • Page 86 PRO-60/70X5FD PRICE PART PARTS CODE DESCRIPTION RANK MARK DELIVERY [7] SUPPLIED ACCESSORIES/PACKING PARTS (PRO-70X5FD) Stand Support Ass'y, x2 CANGKD276WJ01 Stand Base Ass'y CDAi-A778WJ32 Stand Screw Ass'y CSAKKA011WJ01 3D Glasses Accessories, x2 AN-3DG20-EL Remote Control RRMCGA937WJSA Cable Clamp LHLDWA303WJKA Brochure (E) TCTLZA001WJZZ Brochure (F) TCTLZA002WJZZ...
  • Page 87 PRO-60/70X5FD...
  • Page 88 PRO-60/70X5FD COPYRIGHT © 2011 BY SHARP CORPORATION ALL RIGHTS RESERVED. No Part of this publication may be reproduced, stored in a retrieval system, or transmitted in any from or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Pro-70x5fd

Table of Contents