Get Your Phone Ready; Charge The Battery; Insert The Sim Card - Kyocera Hydro WAVE Quick Start Manual

Get Your Phone Ready

Charge the Battery

1. Plug the smaller end of the micro-USB cable into the
phone's charger/USB port.
2. Plug the other end of the USB cable into the charger
and then plug the charger into an electrical outlet.

Insert the SIM Card

Before you start using your phone, you will need to insert a
nano SIM card.
Warning: Use only the nano SIM card included with your
phone.
1. Insert your fingernail into the slit at the bottom of the
back cover and lift the cover up gently.
2. Open the SIM/microSD card holder cover located on the
upper right side of the phone.
3. Slide the flap of the SIM card holder in the direction of
the arrow to unlock it (  ), and then lift the flap up
ready to insert the nano SIM card ( ‚ ).
1
Flap
SIM card holder
2
Get Started 5