Table of Contents
Advertisement
Flashlight
Your phone is equipped with an LED flashlight.
Warning: Do not shine the LED flashlight into anyone's eyes, as doing so may compromise
their vision and cause an accident.
To turn the LED flashlight on or off:
1.
From the Idle screen, press the Center soft key
Tools > Flashlight. The LED flashlight turns on.
2.
Press the Left soft key
[Blink off] to stop blinking.
3.
The following options are available:
Brightness: Set the Flashlight brightness. Select from High, Medium, or Low.
Blink speed: Set the blink speed of Flashlight. Select from Fast, Normal, or Slow.
Light time: Set the Flashlight interval. Select from Always on, 1 minute, 3 minutes,
5 minutes, or 10 minutes.
4.
Press the Center soft key
Note: You cannot use the LED flashlight in certain situations, such as when the battery is very
low.
Voice Commands
You can use your phone's built-in Voice Commands software to dial a phone number or to
launch phone functions. All you have to do is to talk into the phone, and the system will
recognize your voice and complete tasks by itself.
Activate the Voice Commands
► From the Idle screen, press the Voice commands key
The phone prompts you to say the name of the command you want to use. To complete your
task, simply follow the voice prompts.
Tip:
Use Voice commands in a quiet environment so it can accurately recognize your
commands.
Tip:
You can also activate Voice commands with the phone closed. Press and hold the
External speaker key
Tools and Calendar
[Blink on] to begin blinking. Press the Left soft key
[Turn off] to turn the LED flashlight off.
, or press the Call list key
101
[Menu] > Tools & Settings >
.
and the Volume down key
- Quick Links:
- Your Phone at a Glance
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DuraXV LTE Verizon and is the answer not in the manual?
Questions and answers
how do you turn the ringer volume up
To increase the ringer volume on the Kyocera DuraXV LTE Verizon, press the Volume key up repeatedly until the desired volume level is reached.
This answer is automatically generated
How to open text messages?
To open text messages on the Kyocera DuraXV LTE Verizon:
1. If you have a new message notification, highlight the notification and press the Center soft key [Select] to open it.
– or –
2. From the Idle screen, press the Right soft key [Message].
3. Highlight the message or message thread you want to read.
4. Press the Center soft key to open it.
This answer is automatically generated
transfer phone numbers from one phone to kyocera
The manual does not explicitly mention transferring phone numbers from another phone to the Kyocera DuraXV LTE Verizon. However, you can try transferring contacts via Bluetooth by following these steps:
1. Set the other phone to discoverable mode and enable Bluetooth.
2. On the Kyocera DuraXV LTE, open the Contacts application.
3. Select the option to share a contact.
4. If prompted, turn on Bluetooth.
5. Highlight the receiving device (Kyocera DuraXV LTE) and press the Center soft key [Select].
6. Accept the connection and confirm the passcode if prompted.
If the other phone supports contact sharing via Bluetooth, this method should work. Otherwise, you may need to transfer contacts using a SIM card or Verizon's backup services.
This answer is automatically generated
How to enlarge text message with pictures?
To enlarge the text in messages with pictures on the Kyocera DuraXV LTE Verizon, follow these steps:
1. Open the messaging app.
2. Go to the settings menu.
3. Select Font Size.
4. Choose from Small, Medium, or Large to adjust the text size for received messages.
This setting will increase the font size for messages, including those with pictures (MMS).
This answer is automatically generated
need to connect a new kyocera duraxv to a vehicle
To connect a Kyocera DuraXV LTE Verizon to a vehicle, you can use Bluetooth pairing. Follow these steps:
1. Ensure Bluetooth is enabled on both the phone and the vehicle's system.
2. From the phone’s Idle screen, press the Center soft key [Menu] > Tools & Settings > Settings > Wireless & networks > Bluetooth.
3. Turn on Bluetooth if it is not already enabled.
4. Set the phone to discoverable mode.
5. On the vehicle’s system, search for Bluetooth devices.
6. Select the Kyocera DuraXV LTE from the list of available devices.
7. If prompted, confirm the pairing request and enter a passcode if required.
8. Once paired, establish the connection if not automatically connected.
For further details, refer to "Connect a Bluetooth Headset or Car Kit" in the manual.
This answer is automatically generated
How do I delete a message when it gets too old for me to want to keep?
To delete old messages on a Kyocera DuraXV LTE Verizon:
To delete an entire message thread:
1. From the Idle screen, press the Right soft key [Message].
2. Highlight the thread you want to delete.
3. Press and hold the Center soft key > Delete Conversation.
4. Press the Right soft key [Delete].
5. When prompted to confirm, select Delete.
To delete a single message within a thread:
1. While viewing a message thread, highlight the message you want to delete.
2. Press and hold the Center soft key > Delete Messages.
3. Press the Right soft key [Delete].
4. When prompted to confirm, select Delete.
This answer is automatically generated