Setting The Unit; Terminal Cover; Power Indicator; Subsonic Select Switch - Pioneer Premier PRS-D1100M Owner's Manual

Setting the Unit

• To adjust the switch, use standard tip screwdriver if needed.

Power Indicator

The power indicator
lights when the power
is switched on.

Bass Boost Control

You can select a bass boost level from
0, 6, 9 and 12 dB.
For instruction of connecting the bass
boost remote control to the amplifier,
see the "Connection Diagram" section.
3

Terminal Cover

Before setting up the unit, unfasten
the screws with a 4 mm hexagonal
wrench and remove the terminal
cover.

Subsonic Select Switch

The subsonic filter cuts inaudible
frequencies below 20 Hz to elimi-
nate unwanted vibrations and min-
imize power loss.
BFC (Beat Frequency Control)
Switch
BFC switch is on the bottom of the
unit. If you hear a beat while listening
to an MW/LW broadcast with your car
stereo, change the BFC switch using a
small standard tip screwdriver.