2.4 Powering the VisionPlate On and Off
This section describes how to turn the power to the VisionPlate on and off.
2.4.1 Powering the VisionPlate On
To turn the VisionPlate on, press the Power button, as shown in the following illustration:
2.4.2 Powering the VisionPlate Off
For Linux versions, tap the Menu icon, tap System, and then tap Shutdown, as shown in the
following illustration. To force a power off, press and hold the Power button for four seconds.
For Windows XP embedded versions, tap the Start Button, then tap Shutdown, as shown in the
following illustration. To force a power off, press and hold the Power button for four seconds.
Chapter
22
2
Power button