Pioneer DRM-6NX Operating Instructions Manual page 21

Alternative Method
Follow the steps below to install the DRM-6NX as an
NDS server:
1. Verify that the NDS tree is synchronized
Load DSREPAIR on the server in the NDS tree and select
Unattended full repair
If the NDS tree is not synchronized, do not continue
the installation until you have solved the problem
2. Use a standard text editor to edit the configuration
parameters DRM-6NX configuration file .
From Windows Explorer or File Manager, locate the
DRM-6NX configuration file entitle
PIONEER<nnnnnn>\System\Server Properties\config.ini,
( are the last six digits of the serial number)
<nnnnnn>
3. Enter the appropriate settings for these parameters:
Parameter name Value
[Server]
TimeZone =
TimeSyncSource = NDS
[NetWare]
NDSEnable = yes
NDSTreeName =
NDSServerContext =
NDSAdminName =
NDSAdminPassword =
NDSInstall = install
NDSRightsStorage = NDS
NDSRightsFile =
d
config.ini from
Description
Must be set to the time zone
in which the DRM-6NX is
operating
Set to NDS to enable the unit
to match the time set on the
NetWare network.
The Default setting is NDS
Must be set to Yes to enable the
NDS login
The name of the tree where
you want to install the unit
e.g. MEDCORP
The specific name of the
context in the NDS tree where
THE DRM-6NX changer is to
be installed
e.g. Manufacturing.Medtec
The specific name of a user
or administrator with
Supervisor or Create rights to
the context where you want to
install the DRM-6NX changer
e.g. Admin.Medtec
The password of the
administrator entered in
NDSAdminName is shown
above. Once written, this
password will appear as
******
Changing to 'install' when you
are ready to install the changer
A 'forced install 'will overwrite
the existing server object with-
out warning.
Set to NDS to store the access
rights in the NDS tree. Set to
File to store the access rights in
on the Novell server.
If storing the access rights in a
file on the Novell file server,
specify the whole path, e.g.
CORPSERVER/SYS:CDSERVER
/CDSRV.DAT
Parameter name Value
TimeSyncSources = SAP
Example (NDS settings):
The DRM-6NX is placed in Eastern United States.
The name of your NDS tree is ACMECORP; the name
of the context where you wish to install the DRM-
6NX is Corp.Acme; the name of theadministrator
is Admin.Acme. Specify these parameters:
[Server]
TimeZone
TimeSyncSource
. . .
[NetWare]
NDSEnable
NDSTreeName
NDSServerContext
NDSAdminName
NDSAdminPassword
NDSInstall
NDSRightsStorage
TimeSyncSources
4. Save the config.ini file to start the NDS server
installation. The installation takes about 15 seconds
after which users are able to access the DRM-6NX
changer in NDS mode
5. After the installation you must log out then log in to
have all of the necessary rights on the DRM-6NX
server object and the associated volume.
Using the NWAdmin, you will find a new server object
and corresponding volume object in the context you
chose above
The DRM-6NX installed in the NDS Tree
NetWare (NCP)
Description
Default is SAP for the network
agreed time. Alternatively,
enter the chosen server names
to be contacted for time
synchronization.
= US_CAN_Eastern
= NDS
= yes
= ACMECORP
= Corp.Acme
= Admin.Acme
= secret
= install
= NDS
= SAP
21
<DRB1239>