Connecting Up; Connecting The System To Your Av; Receiver Or Tv - Pioneer IDK-01 Operating Instructions Manual

03

Connecting up

Chapter 3
Connecting up
Connecting the system to your AV receiver or TV
Control Dock
for iPod
• A video connection is
necessary if you want to
see iPod video playback
or the OSD of this unit.
• An S-Video cable can
also be used in
connection. However,
the on-screen display is
not available when the
S-Video connection is
made.
SR cable (supplied)
Most Pioneer receivers have a CONTROL OUT terminal which can be used to link this
component, allowing you to use the receiver's remote to control this unit. Check your
Pioneer receiver's operating instructions for more on this. (If you have connected an SR
cable to this terminal, you must point the remote control supplied with this unit at the
remote sensor of the connected receiver or amplifier.)
8
En
OUTPUT
IN
CONTROL S - VIDEO VIDEO R AUDIO L
AC adapter
(supplied)
DC IN 12 V
• Plug in the AC adapter only
after completing all connections.
• Do not use any adapter with
this unit other than the one
supplied.
Optional
connection
to your TV
Audio cable
(supplied)
Video cable
(supplied)
AC power
outlet
TV
VIDEO IN
Receiver or amplifier
R
AUDIO IN
L
VIDEO IN
CONTROL OUT