Z-Suite Installation - zortrax M200 User Manual

Z-SUITE Installation

21.
Download the latest Z-SUITE update from: http://support.zortrax.com/downloads/. In order to
download and install Z-SUITE on your computer, you need to enter the serial number of your device. The
serial number can be found in the printer's menu in "Information" section and on the nameplate on the
back of the printer.
Z-SUITE is a program created specifically for Zortrax devices. Thanks to this application it is possible to
prepare a 3D model for printing by generating a project and saving it in a .zcode format. The program
allows changing and adjusting the print settings, such as the size of the model, the layer thickness, a type
of infill or how much support structure should be generated.
Remember to update Z-SUITE regularly. All updates are available at: http://support.zortrax.com/down-
loads/.
©2017, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following document are registered
33
trademarks of Zortrax and are subject to legal protection.