Table of Contents
Advertisement
Setting silent mode
Drag the status bar downwards.
1
Tap [Sound].
2
Tap
to activate silent mode
･
(vibration) and tap
mode (mute). Tap
mode.
❖ Information
P
Press and hold
for over a second and then tap
･
/
/
in the pop-up screen to switch Mute
(Ringtone 0)/Vibrate/Off (disabling silent mode).
From the Home screen etc., press and hold lower
･
m
part of
to set vibrator. While vibration is on,
m
press
to set to Mute (Ringtone 0). On the
unlock screen, during a call, or while the camera,
WALKMAN, Media Player, etc. is activated, pressing
and holding lower part of
mode.
Setting the terminal to silent mode does not mute
･
sounds for shutter, playback of video or music, alarm,
dialpad operation sound during a call or when [End
call] is tapped, etc. Note that adjusting volume in
Volumes ("Ringtone & notifications" (P.205)) or
turning the volume up by pressing upper part of
m
cancels silent mode.
to activate silent
to cancel silent
m
does not set silent
Capturing screenshot
You can save the current displayed screen as
an image (screenshot).
On the screen you want to capture,
1
press and hold
m
of
for over a second at the
same time.
Screenshot is captured and
･
in the status bar.
❖ Information
You can also capture a screenshot by pressing and
･
P
holding
for over a second and then tapping
[Take screenshot].
Drag the status bar downwards and tap [Screenshot
･
captured.] on the Notification panel to check
captured images in the "Album" application. Tap
[Share] to attach captured images to an application
to send or to share them. "Share" may not appear
depending on notification status on the Notification
panel, but it appears when pinching out on the
Notification panel.
Before Using the Terminal
P
and lower part
appears
41
Advertisement
Chapters
Table of Contents
