Tektronix FCA3000 Programmer's Manual page 111

Group
Syntax
Arguments
Returns
Examples
*PUD
Group
Syntax
Returns
Examples
FCA3000, FCA3100, MCA3000 Series Programmer Manual
Common
*PSC <Decimal data>
*PSC?
= a number that rounds to 0 turns off automatic power-on
<DECIMAL DATA>
clearing. Any other value turns it on.
{1 | 0}
1 is enabled and 0 is disabled.
*PSC1
This example enables automatic power-on clearing.
Protected user data. This is a data area in which the user may write any data up
to 64 characters. The data can always be read, but you can only write data after
unprotecting the data area. Typical uses include storing calibration information,
instrument usage time, or inventory control numbers.
The content at delivery is: #234 FACTORY CALIBRATED ON: 20YY-MM-DD,
where YY = year, MM = month, DD = day.
Common
*PUD <Arbitrary block program data>
*PUD?
<Arbitrary block response data>, where: <arbitrary block program data> is the
data last programmed with *PUD.
SYSTEM:UNPROTECT; *PUD #240Calibrated 1993-07-16, inventory
No.1234
# means that <arbitrary block program data> will follow. 2 means that the two
following digits will specify the length of the data block. 40 is the number of
characters in this example.
Command Descriptions
2-95