Testing Telephone Operation3 - NEC Aspila EX Hardware Manual

CÔNG TY VIỄN THÔNG VIỆT PRO
TESTING TELEPHONE OPERATION
The following procedure will help you determine if a problem being experienced is due to the tele-
phone or the system. Testing the operation of a system phone allows you to check the lamping of each
key, the display, and tones. Follow the procedure below to determine if the phone is operating cor-
rectly.
Key Matrix and LED Test
1.
2.
3.
4.
Quitting Test Mode
1.
2.
Aspila EX Hardware Manual
Chuyên phân phối tổng đài NEC
Section 3: Installing Extensions and Trunks
Unplug the phone.
While holding down dial pad digits 1, 2 and 3, plug the phone back in.
Hold down the 1, 2 and 3 digits for approximately 10 seconds then release them.
If the phone doesn't show "TEST PUSH=" on the display, then repeat Steps 1-3 and
hold the keys down a few seconds longer.
Press any key and its Logical Name should be displayed.
The following chart indicates the Logical Name for each key.
Keys
KEYPAD 0 - 9 D 0 - D 9
KEYPAD * D *
KEYPAD # D #
L 1 - L 24
1
Line Keys 1 - 24
DSS Keys 1 - 10 O 1 - O 10
LND F 1
CONF F 2
HOLD F 3
FLASH F 4
DND F 5
CALL1 F 6
SPK F 7
1
Keys 1, 2 and 3 will also check tones.
2
34-Button Super Display telephone only.
Lift the handset and then replace it.
The phone returns to an idle condition.
Logical Name Table
Logical
Name Keys
CALL2
MIC
MSG
DIAL
CLEAR
CHECK
SOFT KEY 1-4
DIRECTORY
2
MENU
VOL. UP
VOL. DOWN
Section 3: Installing Extensions and Trunks
http://vietpro.com.vn
Logical
Name
F 8
F 9
F 10
F 11
F 12
F 13
S 1 - S 4
TBD
2
TBD
3
3-11