L2 Functions > Lldp > 802.1 Extension Tlv; L2 Functions > Lldp > 802.3 Extension Tlv - D-Link DGS-1210-10 Manual

4 Web-based Switch Configuration
System Description: Specifies whether the System Description TLV is enabled on the port. The possible
field values are:
Enabled – Enables the System Description TLV on the port.
Disabled – Disables the System Description TLV on the port.
System Capabilities: Specifies whether the System Capabilities TLV is enabled on the port. The possible
field values are:
Enabled – Enables the System Capabilities TLV on the port.
Disabled – Disables the System Capabilities TLV on the port.
Define these parameter fields. Click the Apply button to implement changes made and click Refresh to
refresh the table information.
L2 Functions > LLDP > 802.1 Extension TLV
This 802.1 Extension TLV page is used to configure the LLDP Port settings.
From Port / To Port: A consecutive group of ports may be configured starting with the selected port.
Port VLAN ID: Specifies the Port VLAN ID to be enabled or disabled.
VLAN Name: Specifies the VLAN name to be enabled or disabled in the LLDP port. If select Enabled, users
can specifies the content of VLAN ID or VLAN Name or all.
Protocol Identity: Specifies the Protocol Identity to be enabled or disabled in the LLDP port. If select
Enabled, users can specifies the EAPOL, LACP, GVRP, STP or ALL.
Click the Apply button to implement changes made and click Refresh to refresh the table information.
L2 Functions > LLDP > 802.3 Extension TLV
The 802.3 Extension LLDP Port Settings page displays 802.3 Extension LLDP port information and contains
parameters for configuring 802.3 Extension LLDP port settings.
Figure 4.75 – L2 Functions > LLDP > 802.1 Extension TLV Port Settings
D-Link Smart Managed Switch User Manual
66