Yeastar Technology S Series VoIP Administrator's Manual page 93

Message Options
Max Messages per Folder
Max Message Time
Min Message Time
Ask Caller to Dial 5
Operator Breakout
Voicemail
Destination
Greeting Options
Busy Prompt
Unavailable Prompt
Leave a Message Prompt
Playback Options
Announce Message Caller ID If this option is enabled, the caller ID of the party that left the
Announce Message Duration
Announce Message Arrival
Time
Allow Users to
Messages
Table 9-3 Voicemail Configuration Parameters
This sets the maximum number of messages that can be stored
in a single folder of voicemail.
This sets the maximum length of a single voicemail message (in
seconds).
This sets the minimum length of a single voicemail message (in
seconds). Messages below this threshold will be automatically
deleted.
If this option is enabled, the caller will be prompted to press 5
before leaving a message.
from If this option is set, the caller can jump out of the voicemail and go
to the pre-configured destination by dialing 0.
This sets the breakout destination.
Greeting played when the extension is busy.
Greeting played when the extension is unavailable.
Greeting played when dial 5.
message will be announced before the voicemail message begins
playing.
If this option is enabled, the duration of the message in minutes
will be announced before the voicemail message begins playing.
If this option is enabled, the arrival time of the message will be
played back before the voicemail message begins playing.
Review Allow the callers to review their recorded messages before
sending them to the voicemail box.
S-Series VoIP PBX Administrator Guide
92