Setup Screen Operations; Starting Up The Setup Screen - Pioneer PDV-10 Operating Instructions Manual

Setup Screen Operations

With this player, various functions recorded on DVDs can be set in addition to the
settings made with the Setup Navigator. To make these settings you must first
display the setup screen.

Starting up the setup screen

By changing the setting items on the various menus on the setup screen you can
create a more convenient playback environment. The setup screen has two
modes.
Main unit
Remote control unit
4 ¢
1 3 ¡
e 8 E
SETUP
SETUP
7
Press the SETUP button.
The setup screen appears.
Audio1 2 Video Language
Dolby Digital Out –
DTS Out –
96kHz PCM Out –
MPEG Out –
i Setup audio
Digital output format/tone adjust
Move
• The setup screen is displayed whenever
the SETUP button is pressed, regardless
of the player's play mode (play or stop) or
the type of disc (DVD, video CD or CD).
• Press the SETUP button again to close
the setup screen.
Hint:
• When the Setup Navigator is started up,
the on-screen information is displayed
regardless of whether the "Basic" or
"Expert" setup screen mode is selected.
• If the Setup Navigator has appeared
automatically, select "Not Used" then
press the ENTER button, or press the
return button. The setup screen
appears.
General Other
Dolby Digital
Off
96kHz 3 48kHz
MPEG 3 PCM
Exit
SETUP
57
En