Normal 60 Wash Fill/Agitate Time "-011 - grandimpianti BTEL15*N4065 Programming Manual

Programming MDC
11. NORMAL 60 Wash Fill/Agitate Time
"-011"
This option allows the owner to set the amount of wash
fill/agitate time for the NORMAL 60 cycle.
How to Program NORMAL 60 Wash
Fill/Agitate Time
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES 30 (∧) or the PREWASH
(∨) keypad until "PrOg" appears in the Four-
Digit Display.
Figure 29
3. Press the START (enter) keypad and "-001" will
appear in the Four-Digit Display.
4. Press the DELICATES 30 (∧) or the PREWASH
(∨) keypad to scroll through the programmable
options until "-011" appears in the Four-Digit
Display.
Figure 30
5. When "-011" appears in the Four-Digit Display,
press the START (enter) keypad. The current
number of minutes set for NORMAL 60 Wash
Fill/Agitate Time will appear in the Four-Digit
Display.
6. Press the DELICATES 30 (∧) or the PREWASH
(∨) keypad to increase or decrease the current
number of minutes displayed in the Four-Digit
Display to the desired number of minutes.
24
COM16R
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
NOTE: NORMAL 60 Wash Fill/Agitate Time can
be set from zero (0) to 15 minutes. If time is set to
zero, NORMAL 60 Wash cycle will be skipped.
7. Press the START (enter) keypad when the correct
number of minutes appears in the Four-Digit
Display. The next option, "-012", will appear in
the Four-Digit Display.
NOTE: To program "-012" (NORMAL 60 Rinse
Fill/Agitate Time), refer to option 12. To program
other options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable
option, not a value.
2. While pressing and holding the NORMAL 90
keypad with one hand, press the NORMAL 60
keypad with the other hand. The control will
revert back to the previous mode of operation.
COM1R
801293