Pairing may take several minutes. The blue LED indicates
the pairing status:
Pairing status
flashing, then on for 5 seconds, then off
➧
Pairing has been completed successfully. You can now
use the Siemens transmitter.
flashing, then off
➧
Pairing was not successful. In this case, ensure that the
Siemens transmitter is within operating distance and try
again.
The following functions are additionally available when
using Siemens transmitters:
Function
Switch to
transmitter
Stop streaming
Explanation
double-press
Switches to the transmitter or toggles
between transmitters. Only for Siemens
transmitters.
While the connection is established, an
acoustic signal is played.
short press
The blue LED goes off.
DRAFT
Audio streaming
23