Quick Reference Guide
Tighten the Fingers Strap.
2.
Getting Started - Corded Configuration
In order to start using the Imager you must install the Corded Adapter.
Connect Corded Adapter
Align the Corded Adapter on top of the
1.
Imager.
Push the Corded Adapter all the way
2.
into the Locking Slots of the Imager.
Firmly press the Corded Adapter into the
3.
Imager until a "click" is heard ensuring
the Adapter Release Latch is fully
engaged with the Imager.
Remove the Corded Adapter
Hold the Imager in one hand.
1.
Press the Adapter Release Latch.
2.
Pull up the Corded Adapter to release
3.
from the Locking Slots of the Imager.
Fingers
Strap
Adapter Release
Latch
9
Corded
Adapter
Locking Slots