Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hytera TETRA MT680
Summary of Contents for Hytera TETRA MT680
- Page 1 Preface Thanks for your favor in our product. To derive optimum performance from the product, please read this manual, the corresponding TETRA Terminal Series Feature Book and the Safety Information Booklet carefully before use. This manual is applicable to the following model: MT680 Plus F5...
- Page 2 Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Co., Ltd. (the Company) in PRC and/or other countries or areas. The Company retains the ownership of its trademarks and product names. All other trademarks and/or product names that may be used in this manual are properties of their respective owners.
- Page 3 RF Energy Exposure Compliance Your radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This radio complies wi th the FCC RF exposure limits for occupational or controlled RF exposure environment and is authorized by the FCC for occupational use only.
-
Page 4: Fcc Statement
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 5: Table Of Contents
Contents 1. Document Conventions ........................1 1.1 Instructional Conventions ........................ 1 1.2 Notational Conventions ........................1 1.3 Key Operation ..........................1 1.4 Term Explanation ..........................1 2. Items in the Package .......................... 3 3. Product Overview ..........................4 3.1 Front Panel ............................. 5 3.2 Rear Panel ............................ - Page 6 8.1.3 Telephone Call ........................20 8.1.4 Emergency Call ........................20 8.2 DMO .............................21 8.2.1 Individual Call ........................21 8.2.2 Group Call...........................21 8.2.3 Emergency Call ........................21 9. Message ............................22 9.1 Status Message ..........................22 9.2 User Message ..........................22 9.2.1 TMO ............................22 9.2.2 DMO ...........................23 10. Troubleshooting ..........................24 11.
-
Page 7: Document Conventions
Owner’s Manual Document Conventions 1. Document Conventions For your better understanding of this manual, please read the following conventions first. Instructional Conventions Icon Description Note Indicates references that can further describe the related topics. Caution Indicates situations that could cause data loss or equipment damage. Notational Conventions Convention Description... - Page 8 Document Conventions Owner’s Manual Term Description Half-duplex communication is also called “two-way alternate communication”. It Half-duplex indicates the communication is provided in both directions, but only one direction at a time, that is, only one party is allowed to transmit or receive at a time. Full-duplex communication is also called “full-duplex synchronous communication”.
-
Page 9: Items In The Package
Owner’s Manual Items in the Package 2. Items in the Package Please unpack carefully and check that all items listed below are received. If any item is missing or damaged, please contact your dealer. For Mobile Terminal Mobile Terminal Mounting Bracket Kit (1set) Palm Microphone Microphone Hanger... - Page 10 Items in the Package Owner’s Manual Palm Microphone Fuse Power Cord Palm Hanger and Screws Documentation Kit The antenna frequency band is marked on the label of antenna; if not, refer to the label on Note: the product for frequency band information.
-
Page 11: Product Overview
Owner’s Manual Product Overview 3. Product Overview Front Panel Part Name Part Name Microphone/Programming Cable Numeric Keypad Connector Emergency Key Answer/Call Key Volume Control/Group Selector OK Key Knob LED Indicator Options/P3 Key Navigation Key GPS/P2 Key Back Key Function/P1 Key Power On-Off/End Key LCD Display Speaker... -
Page 12: Rear Panel
Product Overview Owner’s Manual Rear Panel Part Name Part Name GPS Antenna Connector Accessory Connector Power Inlet BNC Antenna Connector Programmable Keys For enhanced convenience, you can request your dealer to program the keys (navigation keys, numeric keys 1–9, * key, # key and key) as the shortcuts to needed menus and functions. -
Page 13: Before Use
Owner’s Manual Before Use 4. Before Use Installation 4.1.1 Installation Instructions This terminal is designed for a 10.8–15.6V (typical: 13.2V) negative ground electrical system. Please check the ground polarity and voltage of the vehicle power supply before you install this terminal. Plan a proper position to ensure sufficient space for heat dissipation, thus avoiding unexpected damage to other equipments in the vehicle due to overheating of the terminal that operates under high current. -
Page 14: Installation Steps
Before Use Owner’s Manual 4.1.3 Installation Steps For Mobile Terminal Step 1 Install the SIM card. Caution: If a SIM card is required to realize the End-to-End Encryption (E2EE) feature which should be purchased separately, please install the SIM card first. Otherwise, you can start from Step 2. 1. - Page 15 Owner’s Manual Before Use Step 3 Secure the terminal. Drill the holes at the place for installation according to the holes on the mounting bracket template, and secure the terminal with screws. (See “Illustration for Fixing the Mounting Bracket ” in “Appendix”). Step 4 Connect all the needed accessories to the terminal as shown below: Antenna Antenna...
- Page 16 Before Use Owner’s Manual a. Install the microphone hanger: mount the hanger at a convenient position near the terminal. Align the screw holes on the hanger with the installation holes on the chosen position, and fasten the screws. See the figure below. b.
- Page 17 Owner’s Manual Before Use Drill holes at the place for installation and secure both the remote control head and the terminal (See “Illustration for Fixing the Mounting Bracket ” in “Appendix”). Step 3 Connect the remote control head to the terminal with the remote mounting cable. Step 4 Connect the accessories following Step 4 for installation of mobile terminal.
-
Page 18: Status Indication
Status Indication Owner’s Manual 5. Status Indication Status Icon Name Icon Indication The terminal has not registered with the network (applicable for TMO only). RSSI Icon More bars indicate better signal strength. Unread message(s). Message Icon The Inbox is full. The terminal is operating in TMO. -
Page 19: Operation Icon
Owner’s Manual Status Indication Name Icon Indication A repeater is available but not connected in DMO. Operation Icon Icon Indication Icon Indication Function Menu Options Menu Operate View Search Back Save Restore Stop Play Pause Delete Cancel Answer Send Call Type Modify Unlock LED Indicator... -
Page 20: Menu Navigation
Menu Navigation Owner’s Manual 6. Menu Navigation The following menu lists show the full menus of the terminal in TMO and DMO. You can select your needed menus to be displayed via your dealer. To select and confirm the options in the menu, operate as follows: in the home screen, you can press the OK key or Function/P1 key to enter the “Function”... -
Page 21: Tmo Menu
Owner’s Manual Menu Navigation TMO Menu DMO Menu... -
Page 22: Basic Operations
Basic Operations Owner’s Manual 7. Basic Operations Turning On/Off To turn on the terminal, long press the Power On-Off/End key. Then the LED indicator will glow red and the power-up greeting appears on the LCD. In TMO, after being turned on, the terminal will logon to the network. -
Page 23: Pin Code Security And Changing
Owner’s Manual Basic Operations PIN Code Security and Changing PIN code can prevent unidentified users from using your terminal. To enable or disable the PIN Code feature, enter the Function menu from the home screen by pressing the Function/P1 key or OK key, and then go to “Settings ->... -
Page 24: Call Services
Call Services Owner’s Manual 8. Call Services 8.1.1 Individual Call In TMO , an individual call can be initiated either as a half-duplex call or full-duplex call, which can be received without pressing any key (Direct Signaling) or by pressing the Call key or PTT (Hook Signaling). Contact your dealer for such programming as well as more details. -
Page 25: Group Call
Owner’s Manual Call Services If it is an incoming call with Direct Signaling, there will be an alert tone to inform the called party that a call is received.. If it is an incoming call with Hook Signaling, the terminal sounds alert tone to inform the called party that there is an incoming call. -
Page 26: Telephone Call
Call Services Owner’s Manual 8.1.3 Telephone Call The telephone call is a full-duplex individual call with Hook signaling. To initiate the call, follow the steps below. Initiating a Telephone Call Step 1 Select a gateway. In the home screen, press the Back key or Options/P3 key to enter the “PSTN GATE” or “PABX GATE”... -
Page 27: Dmo
Owner’s Manual Call Services predefined contact. 8.2.1 Individual Call In DMO, an individual call can be initiated only as a half-duplex call. Initiating an Individual Call In the home screen, directly input the number you want to call through the keypad, or press Function/P1 key or OK key to enter the “PhoneBook”... -
Page 28: Message
Message Owner’s Manual 9. Message Status Message Status message, which should be programmed by your dealer only, can facilitate instant messaging of the frequently-used messages. You can only send or view rather than editing the status messages. When the message is sent successfully, the target terminal will receive either the status ID of the status message (if the message text has not been predefined via CPS) or the predefined text (if the message text has been predefined via CPS). -
Page 29: Dmo
Owner’s Manual Message Note: If the message is sent as a flash message, the receiving party can preview all the content in a predefined time period without any operation. Once the time period expires, the home screen will get restored, with the icon displaying on the status bar. -
Page 30: Troubleshooting
Troubleshooting Owner’s Manual 10. Troubleshooting Phenomenon Analysis Solution power cord connected Connect the power cord correctly. improperly. An abnormal voltage is output from Check the battery strength. the vehicle battery. Terminals cannot be Replace the power cord with a new The power cord is damaged. - Page 31 Owner’s Manual Troubleshooting Phenomenon Analysis Solution The terminal is not authorized to Contact the network operator for the access the target group. terminal authorization. The current channel is assigned to Calls always Wait until the channel becomes emergency calls or other calls with interrupted.
- Page 32 Troubleshooting Owner’s Manual Phenomenon Analysis Solution Replace microphone The palm microphone is damaged. connect the new one to the terminal correctly. If the above solutions can not fix your problems, or you may have some other queries, please contact us or your local dealer for more technical support.
-
Page 33: Care And Cleaning
Owner’s Manual Care and Cleaning 11. Care and Cleaning To guarantee optimal performance as well as a long service life of the product, please follow the tips below. Product Care Do not pierce or scrape the product. Keep the product far away from substances that can corrode the circuit. Do not hold the product by its antenna or earpiece cable directly. -
Page 34: Appendix
Appendix Owner’s Manual 12. Appendix 12.1 SSI&TSI Dialing Rules In the TETRA system, subscribers are distinguished by different identities. Each subscriber is assigned with a unique short subscriber identity (SSI), which serves a part of the TETRA subscriber identity (TSI). And TSI is generally composed in this way: Mobile Country Code (MCC) + Mobile Network Code (MNC) + SSI. - Page 35 Owner’s Manual Appendix...
Need help?
Do you have a question about the TETRA MT680 and is the answer not in the manual?
Questions and answers