Button Functions; Led Guide; During Charging; After Setting Power On - Polar Electro Polar OH1 User Manual

Button Functions

Set power ON:
Set training recording ON
(Use as an independent train-
ing device):
Set power OFF:

LED Guide

DURING CHARGING

Charging:
Battery full:

AFTER SETTING POWER ON

Battery status normal:
Battery status low:

WHEN USED AS A SENSOR

Heart rate not detected:
Heart rate detected:

WHEN USED AS AN INDEPENDENT TRAINING DEVICE

Training recording set on but
first time use not done:
Short button press
Press button twice when OH1
is on
Long button press
Yellow LED blinks slowly
Green LED continuously on
Green LED blinks five times
Red LED blinks five times
White LED blinks once every
two seconds
Green LED blinks once every
two seconds
Red LED blinks three times
13