Table of Contents
Advertisement
SK-BTI-029 Toslink/SPDIF Bluetooth
Welcome to use Toslink/SPDIF Bluetooth transmitter & receiver SK-BTI-029
Production description:
SK-BTI-029 is a Bluetooth transmitter and receiver with Toslink.
When used as a Bluetooth transmitter, it can transfer the music on your mobile, Walkman,
TV, computer, etc to your Bluetooth receiver, Stereo Bluetooth headphone, and
Bluetooth speakers through wireless technology.
When used as a Bluetooth receiver, it can been a stereo Bluetooth headphone (by
plugging headphone audio cable into 3.5mm port), or connecting with speaker to receive
audio signal through wireless.
Please read the user manual carefully before use the unit.
Preparation before use
when ready to use SK-BTI-029, you need fully charged of SK-BTI-029, music players, mobile
phones, televisions or computer support Fiber optic interface or 3.5MM audio interface output
devices.
Product picture and function definitions:
A, Multi-function keys
B, mode selection switch (TX: transmitter; RX: receiver)
transmitter & receiver
User manual
Advertisement
Table of Contents
Summary of Contents for Acekool SK-BTI-029
-
Page 1: User Manual
Please read the user manual carefully before use the unit. Preparation before use when ready to use SK-BTI-029, you need fully charged of SK-BTI-029, music players, mobile phones, televisions or computer support Fiber optic interface or 3.5MM audio interface output devices. - Page 2 APT-X LL，48kHZ CODEC (headset or speaker must also support APT-X ); Two connections, it will switch to SBC CODEC automatically Battery 350mAh rechargeable lithium battery Charging supply 100-240V AC Adapter 5VDC,≥300mA Working temperature -10—55℃ Net weight About 38.6g Dimension 60*60*18.4mm Operation: SK-BTI-029 charging:...
- Page 3 2.Charging in low power When the red LED light is flashing in normal use, it indicates that the SK-BTI-029 is in low battery mode and needs to be recharged(it is normal for the blue and red LED light overlap...
- Page 4 SPDIF mode,the optical interface using SPDIF IN in TX mode) 12. SK-BTI-029 working while charging When need to use the SK-BTI-029 for long time, due to the limited built-in battery usage time, it allowed to connect the charging power supply (DC 5V ≥300mA, when the battery is low or when the power supply of poor quality may cause the current sound appears);...
- Page 5 In off state, long press MFB around 3 seconds, after Blue LED flashes twice, SK-BTI- 029 is powered on. (If SK-BTI-029 did not connect with any device, it could directly enter into pairing mode automatically after power on) 2. Power off：...
- Page 6 SPDIF mode,the optical interface using SPDIF OUT in RX mode) 12. SK-BTI-029 working while charging When need to use the SK-BTI-029 for long time, due to the limited built-in battery usage time, it allowed to connect the charging power supply (DC 5V ≥300mA, when the battery is low or when the power supply of poor quality may cause the current sound appears);...
- Page 7 If not, please power off SK-BTI-029, and power on SK-BTI-029 to connect with device A and B. If it does not work, please follow the steps for two connections simultaneously again. Please note that there is no other Bluetooth headset or speaker enters pairing mode when you do the operation connect with two devices.
- Page 8 Bluetooth transmitter Chipset for device A Chipset for device B result SK-BTI-029 CSR 8635 CSR 8635 pass SK-BTI-029 CSR 8635 CSR 8645 pass SK-BTI-029 CSR 8635 CSR 8610 pass SK-BTI-029 CSR BC57E687C CSR 8635 pass SK-BTI-029 CSR BC57F687A05 CSR 8635...
- Page 9 1. Named the two mobile phone as A and B. 2. Following the pairing steps to connect A with SK-BTI-029, after successful connection, please switch off the Bluetooth of the mobile A. Double click MFB of SK-BTI-029 to enter into pairing mode.
- Page 10 2. If SK-BTI-029 did not connect with the Bluetooth headset or speaker more than 1 minutes. Please try to clear up the pairing list of the SK-BTI-029. If the Bluetooth headset or Bluetooth speaker connected with SK-BTI-029 before, please reopen the SK-BTI-029 after clear up the pairing list.
Need help?
Do you have a question about the SK-BTI-029 and is the answer not in the manual?
Questions and answers