Smart Setup Instructions - ROHO Smart Check Operation Manual

Smart Setup Instructions

Smart Check will find and save the inflation setting for you, on your cushion, in your
chair. NOTE: Results may vary based on body type.
• Perform the following steps in the usual environmental conditions.
• The cushion MUST be overinflated to start Smart Setup. You may
temporarily feel unstable; if so, proceed with caution.
• The individual MUST be seated on the cushion in the chair before using
Smart Check.
1
Quick Disconnect
1. Place the cushion in the chair. Place the
nozzle of the pump over the inflation valve.
If a cushion cover is used, place the cover on
the cushion before inflating.
2
2. Open the inflation valve. Overinflate the
cushion until it bulges.
Close the inflation valve.
Remove the pump.
Smart Check by ROHO Operation Manual
Cushion Cover
Inflation Valve
Open
Close
3
3. Sit in the chair in your usual position.
Pull to remove the tab (first-time use only).
4
4. Make sure the inflation valve is closed.
Attach Smart Check to the cushion. You will
hear a "click" when the connection is secure.
7
Symbols and Lights for Smart Setup
Setup
Button
Red Light
"Remove air."
Check
Button
Green Light
"Setup is complete."
Red Light
"Add air."
Quick Disconnect