PC/AV Mode
Set
PC/AV Mode
to AV. The picture size will be enlarged.
This option is useful when you view a movie.
•
Set to
PC
when connected to a PC.
•
Set to
AV
when connected to an AV device.
― Supplied for the wide models only such as 16:9 or 16:10.
― If the monitor (when set to HDMI/DisplayPort) is in power saving mode or is displaying the message
Signal
Cable, press the
button to display the On Screen Display (OSD). You can select
Source Detection
Select either
Auto
or
Manual
as the method to recognize input signal.
Key Repeat Time
Control the response rate of a button when the button is pressed.
Acceleration,
1
sec, or
2 sec
can be selected. If
when a button is pressed.
Reset All
Return all the settings for the product to the default factory settings.
PC
No Repeat
is selected, a command responds only once
Information
View the current input source, frequency and resolution.
Check
or AV.
33