Download
Share
Print this page
Argos Malibu Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Argos Manuals
  4. Indoor Furnishing
  5. Malibu
  6. Assembly instructions manual

Argos Malibu Assembly Instructions Manual

3 drawer 2 door robe
Hide thumbs Also See for Malibu:

Advertisement

Quick Links

Download this manual See also: Assembly and Instruction Manual
Malibu - 3 Drawer 2 Door Robe
Assembly Instructions -
Dimensions
Width - 74.5cm
Depth - 50cm
Height - 181cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Please keep for future reference
630/2685
630/2427
630/2661
630/2702
630/3158
194/5999
147/2668
189/7047
191/2180
181/9551
192/6523
MADE IN
BRITAIN
Issue 3 - 11/10/13

Advertisement

loading
Need help?

Need help?

Do you have a question about the Malibu and is the answer not in the manual?

Questions and answers

Related Manuals for Argos Malibu

Summary of Contents for Argos Malibu

  • Page 1 Malibu - 3 Drawer 2 Door Robe Assembly Instructions - 630/2685 Please keep for future reference 630/2427 630/2661 630/2702 630/3158 194/5999 147/2668 189/7047 191/2180 181/9551 192/6523 Dimensions Width - 74.5cm Depth - 50cm MADE IN Height - 181cm BRITAIN Important -...

  • Page 2: Care And Maintenance

    Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 49kgs. Please lift space to layout the parts before recommend the with care.
  • Page 3 If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below (D0127A) (714 x 494mm) Base (D0126A) (714 x 478mm) Drawer Front (D0131A) (710 x 157mm) Left Side...
  • Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
  • Page 5 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Prepare the 3 drawer fronts and wraps Screw 2 metal dowels into the holes on the back of the drawer fronts Note: Tighten metal dowels up fully against...
  • Page 6 Assembly Instructions Step 3 Fit the drawer stops Carefully break off the 2 drawer stops (F599) from each pair of the drawer runners Push the drawer stops fully through the drawer wraps from the inside. F599 F599 F599 F599 Step 4 Attach the handles Attach a handle each drawer front...
  • Page 7 Assembly Instructions Step 5 Prepare the left and right side F600 Separate runners Push fit 3 left runners marked ‘L’ into the holes shown on left side Finished front edge Note: Runners must be be fitted flat against the panel. If necessary gently tap into final position.
  • Page 8 Assembly Instructions Step 6 Prepare top and base Tap 2 wooden dowels into the ends of the top Tap 2 wooden dowels into the ends of the base Step 7 Fit the top and base to the right side Attach the top to the right side using the dowel already fitted and...
  • Page 9 Assembly Instructions Step 8 Prepare the 2 plinths Plain chipboard and the rail surface Tap 2 wooden dowels into the ends of the 2 plinths Tap 4 wooden dowels into the ends Plain chipboard of the rail surface Finished front edge Step 9 Fit the rail Attach the rail...
  • Page 10 Assembly Instructions Assembly Instructions Step 10 Fit the 2 plinths 2 people are needed here Back of unit Attach the 2 plinths the right side using the dowel already fitted to them and secure with screws Note: Support the plinth at the back of the unit until the left side has been fitted in...
  • Page 11 Assembly Instructions Step 12 The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Fit the foldy back Square up the unit by making sure that measurement x to x equals y to y.
  • Page 12 Assembly Instructions Step 14 Prepare the 2 doors Push fit 2 hinges into each door Secure each hinge with 2 screws Note: Before securing with the screws, make sure that the hinges are positioned at 90 degrees with the front edge of the door.
  • Page 13 Assembly Instructions Step 16 Fit doors and handles screw A 2 people are needed here Note: The easiest way to attach the doors is to fit the top hinge first, then align and fit the bottom hinge. screw B Push the hinge onto the front part of the hinge plate Keep the hinge...
  • Page 14 Assembly Instructions Step 17 Adjust the doors if required Before adjusting the doors, use a spirit level to check the base (or top) of the unit is level, front-to-back and side-to-side in the 3 positions shown. Use suitable packing pieces (not supplied) to make the unit level BEFORE making any adjustment to the hinges,...
  • Page 15 Assembly Instructions Step 18 Joining units together Fittings have been supplied so you are able to join units together. Make sure that your first unit is level. Push the other unit up against the first unit and ensure both units are level.
  • Page 16 Lift with care. Assembly is complete If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW ALR2425...