Download Print this page

Aqua Systems SmartChoice II Wi-Fi Quick Start Wi-Fi Setup

Hide thumbs

page of 12

/ 12
Bookmarks

Quick Links

Download this manual

Quick Start Wi-Fi Setup

SmartChoice

II Wi-Fi

™

CLOCK

REGEN

Need help?

Do you have a question about the SmartChoice II Wi-Fi and is the answer not in the manual?

Questions and answers

Summary of Contents for Aqua Systems SmartChoice II Wi-Fi

Page 1 Quick Start Wi-Fi Setup SmartChoice II Wi-Fi ™ CLOCK REGEN NEXT...
Page 2 (Aqua Systems’ Installer to complete this page) Important Product Information Date of Installation: Serial Number: MAC id: Dealer Name: Installer:...
Page 3 Getting the best signal strength To get the best signal strength, please refer to the diagram below.* Wi-Fi Location Equipment Location This Wi-Fi and Aqua Systems equipment location should provide the signal strength needed. *If you are unable to connect to your Wi-Fi, you might need to get a Wi-Fi range extender to boost your existing Wi-Fi signal.
Page 4 Connecting to your SmartChoice™ II Wi-Fi: Place your system valve in “Wi-Fi Setting” mode. On the valve press the Clock and Down buttons at the same time and hold for 15 seconds. Press Clock and down buttons together and hold for 15 seconds CLOCK REGEN...
Page 5 MAC id. See your equipment documents for exact name. (ie. B0xxxxxxxxxx). (If you do not see your Aqua Systems equipment MAC id, go back to step #1 to place your equipment in “Wi-Fi Setting” mode again.) If this is the first time that you are connecting, you will be asked for...
Page 6 Using the same computer or mobile device, open the the web browser and enter the address: 192.168.0.1 192.168.0.1 After the page loads, select the Wi-Fi network that best suits your Aqua Systems equipment. If the network you are selecting is password protected, type in the Wi-Fi network password and enter.
Page 7 Connecting to your SmartChoice™ II Wi-Fi: To complete setup, visit https:/ /wifi.ilovemywater.com and register your Aqua Systems equipment. ONLINE REGISTRATION SUBMIT...
Page 8 MAC id. See your equipment documents for exact name. (ie. B0xxxxxxxxxx). (If you do not see your Aqua Systems equipment MAC id, go back to step #1 to place your equipment in “Wi-Fi Setting” mode again.) If this is the first time that you are connecting, you will be asked for a password of “12345678”...
Page 9 NOTES...
Page 10 NOTES...
Page 11 NOTES...