Tektronix MSO2024B Programmer's Manual page 154

Commands Listed in Alphabetical Order
DIAg:SELect (No Query Form)
Group
Syntax
Arguments
DIAg:SELect:<function> (No Query Form)
Group
Syntax
Arguments
2-138 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual
Sets the type of diagnostics grouping.
Calibration and Diagnostic
DIAg:SELect {ALL|APPKey|CPU|DISplay|FPAnel|IO|ROM|ACQ}
runs all diagnostic groups.
ALL
runs just the application key diagnostic group.
APPKey
runs just the CPU diagnostic group.
CPU
runs just the display circuit diagnostic group.
DISplay
runs just the front panel diagnostic group.
FPAnel
runs just the IO board diagnostic group.
IO
runs just the IO board diagnostic group.
ROM
runs just the acquisition system diagnostic group.
ACQ
Runs self-tests on the specified system subsystem.
Calibration and Diagnostic
DIAg:SELect:<function>
specifies a single oscilloscope subsystem on which to run self tests
<function>
(diagnostics). Valid values are:
tests the acquisition system.
ACQ
tests the application keys.
APPKey
tests the CPU.
CPU
tests the display.
DISplay
tests the front panel controls.
FPAnel
tests the IO ports.
IO
tests the system read only memory.
ROM