Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Excalibur RES10
Summary of Contents for Excalibur RES10
- Page 1 RES10 www.ExcaliburDehydrator.com...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using electrical appliances, these basic safety precautions should always be followed. 1. Read all instructions. Save these instructions. 2. Do not touch hot surfaces. 3. To protect against electrical hazards do not immerse any part of the dehydrator, cord, or plug in water or other liquid. -
Page 3: Before The First Use
Carefully unpack the Excalibur. Check that all parts are included, including the 10 trays, 10 mesh screens, the separation panel, and the power cord. Take time to become familiar with the control panel and the functionality of the Excalibur before drying foods. We suggest pressing each button to check functionality and to understand the controls. - Page 4 NOTE: To use the 2-zone, you will be dehydrating (2) 5 trays of food. Insert the solid tray in the middle slot to divide the Excalibur into two (2) 5-tray dehydrators. Upper chamber - A and Lower Chamber - B.
-
Page 5: Control Panel
FUNCTIONS and CONTROL PANEL: The POWER switch is on the back of the machine. Use this to turn the power ON/OFF. > next to a word selection indicates the menu selection title you are choosing. CONTROL PANEL takes you back to the previous menu is the Enter or Set button takes you back to the HOME Screen (Dry It and My Recipes) takes you to My Recipes (i.e. - Page 6 SETTINGS : Temperature Units, Button Feedback, Display Brightness, Factory Settings Press the 1) Set or change the temperature unit to Fahrenheit or Celsius. Default setting is Fahrenheit. 2) Set or change the button feedback setting. Options include: Beep + Haptic vibration ...
- Page 7 SETTING the DEHYDRATOR: WELCOME & HOME Screen: Plug electrical cord into back of unit. Then plug electrical cord into electrical outlet. With the front of the unit facing you, reach to the LEFT, top, back side of the unit. Flip the power switch to on. The Welcome screen will appear.
- Page 8 After you choose the ZONE, the next screen will show you the Remaining Time and Set Temperature. At any time during the drying process, you can move the cursor to change the time or temperature. If you choose CANCEL SESSION, next screen lets you confirm yes or no. SETTING 2 time / 2 temperature This setting is most often used to speed up the drying process, decreasing the total drying time, by setting a period of time at a higher temperature and a period of time at a lower temperature.
- Page 9 To START the drying process, press the on the control panel. The selection will move to > Start. Press After you press START, select the zone you want to set. Press the on the control panel to scroll thru the options. When the > is on the zone you want, press to selection.
- Page 10 After you set Zone B's temperature, you will scroll down to either > EDIT Zone A or > Start. To START the drying process, have the selection > Start. Press The drying process will begin and the next screen will look like this: NOTE: will light when both A &...
-
Page 11: Troubleshooting Guide
All Excalibur® Dehydrators are checked before shipping for electrical or mechanical problems. If you see any damage to the machine due to rough shipping, report it to the shipper or dealer you purchased from or contact us if you bought directly from Excalibur: (800) 875-4254 or (916) 381-4254 from 8am-5pm Mon-Fri Pacific Standard Time. -
Page 12: Cleaning And Maintenance
One side of my drying trays seems to be dried before the other. What should I do? Because your dehydrator may dry one side faster than the other, halfway through the drying cycle you may want to turn the trays 180º. This may speed up the dehydration process and will reduce energy consumption.
Need help?
Do you have a question about the RES10 and is the answer not in the manual?
Questions and answers