Install Batteries - Radio Shack 3300280 User Manual

Install Batteries

n
Note: When using rechargeable batteries, for best charging
performance use ONLY NiMH batteries.
1. Install two AAA alkaline or
rechargeable batteries (neither
included), matching the polarity
symbols (+and –) marked inside.
2. Switch ALK/RCH to ALK for alkaline
or RCH for rechargeable batteries.
Battery Notes:
• Dispose of old batteries promptly and
properly. Do not burn or bury them.
• Use only fresh batteries of the required size and recommended
type. Do not mix old and new batteries of different sizes or types.
• If you do not plan to use the headphones for an extended
time, remove the batteries. Batteries can leak chemicals that
can damage electronic parts.
• When the power LED on the headphones dims, replace your
alkaline batteries or charge the rechargeable batteries.
Charge Rechargeable Batteries (Optional)
1. Turn off the headphones and the transmitter.
2. Make sure rechargeable batteries are installed and
ALK/RCH is set to RCH.
3. Dock your headphones on the transmitter with the
triangle icons facing together. The green circle LED on the
transmitter fl ashes.
Recycle Rechargeable Batteries
Placing rechargeable batteries in the trash can be harmful to
the environment. Instead, recycle old rechargeable batteries
at your local RadioShack store free of charge. RadioShack
participates in the RBRC
committed to preserving the environment and conserving
natural resources. Call 1-800-822-8837 for more information.
© battery recycling program, and is
4
ALK/RCH