External Automatic; Antenna Tuner - Yaesu FT DX 1200 Operating Manual

I
NSTALLATION OF
FC-40 E
XTERNAL
Setup the FT 1200
DX
The optional FC-40
impedance to the FT 1200
DX
[ MENU ]
[ VFO-B/CLAR ]
LECT
[ SELECT ]
B/CLAR ]
EXTERNAL
[ SELECT ] button.
[ MENU ] button to save the new setting and
exit to normal operation.
Operation
[ TUNE ] button briefly to activate the
TUNER
[ TUNE ] button for one second
to begin automatic tuning. The transmitter will be
TUNER
tuning is in progress.
cancel the automatic tuning.
[ TUNE ]
Page 128
O
PTIONAL
A A
UTOMATIC NTENNA
FT 1200 microprocessor that the FC-40 is being used. This is done
DX
179 TUNER SE-
[ VFO-
button) to select
[ TUNE ]
FCC ID: K6620581X50 / IC: 511B-20581X50
A
CCESSORIES
T (
UNER FOR
[ TUNE ] Button [ MENU ] Button
[ / ] Button
N :
OTE
terminal of FC-40.
The carrier signal transmits continuously while
sure you are not interfering with others who may
It is normal to hear the sound of the relays while
tuning is in progress.
If the impedance cannot be matched by the FC-40
microprocessor will not retain the tuning data for that
FC-40 presumes that you will want
to adjust or repair your antenna system to correct the
FT 1200 O
DX
W A )
IRE NTENNA
[ SELECT ] Button
[ VFO-B/CLAR ] Knob
TUNER
M
PERATING ANUAL
YAESU MUSEN CO., LTD.