Netconf Soap Http Enable - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

configured "a" as the shortcut key by using the escape-key a command. When a NETCONF message
contains the character "a," only the contents after the last "a" in the message can be processed.
Examples
# Enter XML view.
<Sysname> xml
<?xml version="1.0" encoding="UTF-8"?><hello
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"><capabilities><capability>urn:ietf:pa
rams:netconf:base:1.1</capability><capability>urn:ietf:params:netconf:writable-runnin
g</capability><capability>urn:ietf:params:netconf:capability:notification:1.0</capabi
lity><capability>urn:ietf:params:netconf:capability:validate:1.1</capability><capabil
ity>urn:ietf:params:netconf:capability:interleave:1.0</capability><capability>urn:iet
f:params:netconf:capability:hp-netconf-ext:1.0</capability></capabilities><session-id
>1</session-id></hello>]]>]]>
# Quit XML view.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session>
</close-session>
</rpc>]]>]]>
<Sysname>

netconf soap http enable

Use netconf soap http enable to enable NETCONF over SOAP over HTTP.
Syntax
netconf soap http enable
undo netconf soap http enable
Default
NETCONF over SOAP over HTTP is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command is not available in FIPS mode.
This command enables the device to resolve NETCONF messages that are encapsulated with SOAP in
HTTP packets.
Examples
# Enable NETCONF over SOAP over HTTP.
<Sysname> system-view
[Sysname] netconf soap http enable
179