Installation Instructions - GE UVB30 Owner's Manual & Installation Instructions

Installation
Instructions
"If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737)
or visit our website at: GEAppliances.com"
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
IMPORTANT
•
instructions for local inspector's use.
IMPORTANT
•
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions for
future reference.
• Skill level – Installation of this vent hood requires
basic mechanical and electrical skills.
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of
an electrical short circuit, grounding reduces the risk
of electric shock by providing an escape wire for
the electric current. This appliance is equipped with
a cord having a grounding wire with a grounding
plug. The plug must be plugged into an outlet that is
property installed and grounded.
WARNING
Improper grounding can result in a risk of electric
shock.
Consult a qualified electrician if the grounding
instructions are not completely understood, or if
doubt exist as to whether the appliance is properly
grounded.
Do not use an extension cord. If the power supply
cord is too short, have a qualified electrician install
an outlet near the appliance.
If you received a damaged vent system, you should
contact your dealer.
49-80777-1
— Save these
— Observe all governing
Downdraft Vent Systems
UVB30, UVB36
PARTS SUPPLIED
Open the carton and remove parts package.
Check contents to be sure all pieces are
present.
1 Remote Switch
2 Filters
TOOLS AND MATERIALS REQUIRED
• Safety glasses
• Large flat-blade screwdriver
• Jigsaw
• Carpenter's square
• Ductwork to suit the installation
• Level
REMOVE PACKAGING
Remove the shipping materials and the carton;
set carton aside. The carton can be used as a
pad when changing or adjusting vent direction.
4 Stabilizing Brackets
With Screws
1 Wire and White
Connector
7