Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Full Boar FBT-1200
Summary of Contents for Full Boar FBT-1200
- Page 1 DEMOLITION HAMMER • 40 Joules • 1150min INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 0217...
-
Page 2: Specifications
SPECIFIC TIONS – MODEL NO. FBT-1200 Power: 1500W Input: 230-240V ~ 50Hz Impact Energy: 40 joule Impact Rate: 1150min Breaking Capacity: 200mm Bit Fitment: Weight (tool only): 14.2kg KNOW YOUR PRODUCT 5. Carbon Brush Access 1. Front Handle (with soft grip) 2. -
Page 3: Table Of Contents
T BLE OF CONTENTS SPECIFICATIONS………………………………………… Page 2 KNOW YOUR PRODUCT………………………………. Page 2 INTRODUCTION………………………………………... Page 4 SAFETY INSTRUCTIONS……………………………….. Page 4 ASSEMBLY……………………………………………….. Page 8 OPERATION …………………………………………….. Page 9 MAINTENANCE …………….………………………….. Page 10 CONTENTS ……………………………………………... Page 13 WARRANTY……………………………………………… Page 14... -
Page 4: Introduction
The electric motor has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Full Boar tools are interchangeable for Australia and New Zealand. - Page 5 GENER L S FETY INSTRUCTIONS W RNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.
- Page 6 GENER L S FETY INSTRUCTIONS (cont.) d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Page 7 DDITION L S FETY RULES FOR DEMOLITION H MMERS • Wear ear protectors. Exposure to noise can cause hearing loss. • Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. • Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord.
-
Page 8: Assembly
SSEMBLY W RNING! BEFORE TT CHING OR REMOVING CCESSORIES, BE SURE TO DISCONNECT THE DEMOLITION H MMER FROM THE POWER SUPPLY djusting the Front Handle The front handle (1) is adjustable to any position around the 360° handle collar mount. 1. - Page 9 OPER TION On/Off Switch To turn the demolition hammer on, squeeze the On/Off Trigger (2). To turn the demolition hammer off, release the On/Off Trigger (2). Lock-on Button To lock the On/Off Trigger (2). in the on position that the demolition hammer continually works, squeeze the On/Off Trigger (2) and then press the Lock-On Button (3).
-
Page 10: Operation
MAINTENANCE • Keep the ventilation vents of the demolition hammer clean at all times, if possible, prevent foreign matter from entering the vents. • After each use, blow air through the demolition hammer housing to ensure it is free from all dust particles which may build up. Build up of dust particles may cause the demolition hammer to overheat and fail. - Page 11 TROUBLE SHOOTING Symptom Solution Accessory is falling out Ensure that the accessory locking bolt has been rotated to the correct position. Not chiseling or low Tool temperature low breaking power Accessories not lubricated Refer to insert or Cold Hammering section for instructions on how to resolve this issue Accessory is jammed/ stuck Release the accessory locking mechanism,...
-
Page 12: Description Of Symbols
DESCRIPTION OF SYMBOLS Volts Hertz Alternating current Watts /min Revolutions or No load speed reciprocation per minute ø Diameter Decibel level Double insulated Regulator compliance mark /bpm Impact rate Warning C RING FOR THE ENVIRONMENT Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. -
Page 13: Contents
CONTENTS 1 x FBT-1200 Demolition Hammer 1 x Hex key 1 x Pointed chisel 1 x Carry case 1 x Flat chisel 1 x Side handle (fitted) 1 x Grease pot Distributed by: Ozito Industries Pty Ltd AUSTRALIA (Head Office) -
Page 14: Warranty
WARRANTY YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE (see www.bunnings.com.au or www.bunnings.co.nz for store locations) WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: Australia 1800 069 486 New Zealand 0508 069 486...
Need help?
Do you have a question about the FBT-1200 and is the answer not in the manual?
Questions and answers