A. Drive pulley side
Adjust the "–" of the character belt to the position of the hole (mark).
("–" shown in the above arrangement of characters)
Cutout
B. Driven pulley side
Hole(mark)
Adjust the center of the space of the character belt to the position of
hole (mark).
4. Note for disassembly and assembly
4-1. Disassembly of upper / lower cabinets
1) Hold the bottom housing and push down the upper housing at
circled 1 and slide the upper housing outwards.
2) Do the same at circled 2 and then 3.
3
Driven pulley
1
2
4-2. Tightening torgue value
1) Key PWB : 1.5 0.2kg
UPPER CASE
6
2) Lower case : 2.5 0.5kg
LOWER CASE
3 x 8
UPPER CASE
1
2
2
4
3
5
6
1
2
3
5
4